Distel hardware

schmolmo·distel-hardware·kicad/v2_atmega8_encoder.kicad_pcb

Distel hardware PCB layout, top view — open source AVR/Arduino board by schmolmo

About the Distel hardware PCB

Distel hardware is an open source AVR/Arduino PCB design by schmolmo, published on GitHub. It is a 2-layer board measuring 175.5 × 94.5 mm, with 25 components from 17 distinct parts.

Its main chip is the ATmega8-16PU, from the AVR/Arduino family. Other key parts include the 6N138 and L7805. By type, the board carries 5 resistors, 3 ICs, 3 connectors, 3 capacitors, 2 switches and 1 module.

From the project

Multi-Player Controller for Distel Lang

Main components on the Distel hardware

Distel hardware bill of materials (BOM)

25 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
6N138
U1
1
ATmega8-16PU
U2
1
L7805
U3
1
Motor_DC
M1
1
16 Mhz
Y1
1
AVR-ISP-6
J1
1
Jack-DC
J2
1
Mini-DIN-6
J3
4
Rotary_Encoder
EN1, EN2, EN3, EN4
2
DIN-5
MIDI_IN1, MIDI_OUT1
1
SW_DIP_x03
SW1
1
SW_SPDT
SW2
1
1N914
D1
2
22p
C1, C2
1
100n
C3
1
10K
R1
4
220
R2, R3, R4, R5

Distel hardware design files

The KiCad project lives in the schmolmo/distel-hardware repository on GitHub; these links point at the commit this page was built from.

Distel hardware: common questions

What microcontroller does the Distel hardware use?

The Distel hardware is built around the ATmega8-16PU, from the AVR/Arduino family.

How big is the Distel hardware PCB?

The Distel hardware measures 175.5 × 94.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Distel hardware?

25 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Distel hardware design files?

From the schmolmo/distel-hardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Distel hardware design in my own project?

The repository has no license, so all rights stay with schmolmo. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Distel hardware without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards