Battery internals
About the Battery internals PCB
Battery internals is an open source PCB design by schuhumi, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 105 × 10 mm, with 7 components from 7 distinct parts.
It belongs with the power & battery and robotics & motion designs in this gallery.
From the project
autoCut is a heavy duty 4x4 automatic lawn mower robot
autoCut is an automatic lawn mower robot. It features: - Four weel drive with kink steering - Motorized mowing height leveling - Two 85 watt mowing motors, each equipped with two very sharp blades, able to snap back on hard obstacles - On the fly interchangeable LiPo-battery with voltage monitoring - Wifi network connection for web interface which includes gamepad remote control - Raspberry Pi as its main computer and head of the microcontroller i2c-network
Battery internals bill of materials (BOM)
7 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | InternBalance | Socket_Strip_Straight_1x06 | P1 |
| 1 | InternPower | PowerConnect_Handsolder | P2 |
| 1 | BattPower | PowerConnect_Handsolder | P3 |
| 1 | BattBalance | Pin_Header_Straight_1x05 | P4 |
| 1 | ExtBalance | Connector_MPX_6Pin | P5 |
| 1 | ExtPower | Connector_MPX_6Pin | P6 |
| 1 | P*** | 1pin | 1PIN |
Battery internals design files
The KiCad project lives in the schuhumi/autocut repository on GitHub; these links point at the commit this page was built from.
Battery internals: common questions
How big is the Battery internals PCB?
The Battery internals measures 105 × 10 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Battery internals?
7 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Battery internals design files?
From the schuhumi/autocut repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Battery internals design in my own project?
Yes, under the terms of its GPL-3.0 license, which schuhumi chose for the repository.
More boards in autocut
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
Module 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k