Pathfinder with knob
sebas847·Pathfinder-with-knob·Files/Pathfinder.kicad_pcb
About the Pathfinder with knob PCB
Pathfinder with knob is an open source RP2040/RP2350 PCB design by sebas847, published on GitHub. It is a 2-layer board measuring 62.5 × 78 mm, with 11 components from 5 distinct parts.
Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 4 switches, 3 diodes, 3 resistors and 1 IC.
From the project
Inputs: 3 Mechanics switches + 1 Encoder EC11 with bttn.
Main components on the Pathfinder with knob
Pathfinder with knob bill of materials (BOM)
11 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-RP2040-DIP | XIAO-RP2040-DIP | U1 |
| 3 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW4 |
| 3 | L08R5000Q1 | LEDRD254W57D500H1070 | D1, D2, D3 |
| 3 | R | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Vertical | R1, R2, R3 |
Pathfinder with knob design files
The KiCad project lives in the sebas847/Pathfinder-with-knob repository on GitHub; these links point at the commit this page was built from.
Pathfinder with knob: common questions
What microcontroller does the Pathfinder with knob use?
The Pathfinder with knob is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.
How big is the Pathfinder with knob PCB?
The Pathfinder with knob measures 62.5 × 78 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pathfinder with knob?
11 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pathfinder with knob design files?
From the sebas847/Pathfinder-with-knob repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pathfinder with knob design in my own project?
The repository has no license, so all rights stay with sebas847. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Pathfinder with knob without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k