M5Stamp-Pico VL53L4CX KP-BNO055
see-ranked·M5Stamp-Pico_VL53L4CX_KP-BNO055·Circuit/Circuit.kicad_pcb
About the M5Stamp-Pico VL53L4CX KP-BNO055 PCB
M5Stamp-Pico VL53L4CX KP-BNO055 is an open source RP2040/RP2350 PCB design by see-ranked, published on GitHub. It is a 2-layer board measuring 80 × 80 mm, with 20 components from 17 distinct parts.
Its main chip is the M5Stamp_Pico, from the RP2040/RP2350 family. Other key parts include the BP5293-50, TCA9548A and KP-BNO055. By type, the board carries 10 connectors, 3 ICs, 2 switches, 2 capacitors, 2 resistors and 1 diode.
From the project
このプロジェクトは、M5Stamp-Pico、ToF距離センサ「VL53L4CX」、9軸センサモジュール「KP-BNO055」で構成された回路設計のKiCadプロジェクトです。
このプロジェクトは、M5Stamp-Pico、ToF距離センサ「VL53L4CX」、9軸センサモジュール「KP-BNO055」で構成された回路設計のKiCadプロジェクトです。
- M5Stamp-Pico: ESP32-PICO-D4搭載の小型開発ボード - VL53L4CX: STMicroelectronics製ToF距離センサ - KP-BNO055: Bosch製9軸センサモジュール(加速度・ジャイロ・地磁気) - TCA9548A: I2Cマルチプレクサ(複数のI2Cデバイス管理用) - A295-CTRPB-1: USB Type-Cコネクタ(秋月電子通商) - SS12D00G3: スライドスイッチ
2. プロジェクトを開く - File → Open Project... を選択 - Circuit/Circuit.kicadpro` を開きます
Main components on the M5Stamp-Pico VL53L4CX KP-BNO055
M5Stamp-Pico VL53L4CX KP-BNO055 bill of materials (BOM)
20 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BP5293-50 | TO-220-3_Horizontal_TabDown | U1 |
| 1 | TCA9548A | TCA9548A_Breakout | U2 |
| 1 | KP-BNO055 Wonder Kit | KP-BNO055 | U3 |
| 1 | M5Stamp_Pico | M5Stamp-Pico-Board | J1 |
| 2 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J2, J6 |
| 1 | VL53L4CX | PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | A295-CTRPB-1 Chang Enn Co., Ltd. | A295-CTRPB-1 | J4 |
| 1 | Conn_01x12_Pin | PinHeader_1x12_P2.54mm_Vertical | J5 |
| 2 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J7, J8 |
| 2 | PinHeader | PinHeader_1x02_P2.54mm_Vertical | J9, J10 |
| 1 | SW_Push | SW_PUSH_6mm | SW1 |
| 1 | SW_SPDT | SS12D00G3 | SW2 |
| 1 | PWR | LED_D5.0mm | D1 |
| 1 | 0.1uF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 1 | 10uF | C_Radial_D5.0mm_H5.0mm_P2.00mm | C2 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
M5Stamp-Pico VL53L4CX KP-BNO055 design files
The KiCad project lives in the see-ranked/M5Stamp-Pico_VL53L4CX_KP-BNO055 repository on GitHub; these links point at the commit this page was built from.
- LayoutCircuit/Circuit.kicad_pcb
- SchematicCircuit/Circuit.kicad_sch
M5Stamp-Pico VL53L4CX KP-BNO055: common questions
What microcontroller does the M5Stamp-Pico VL53L4CX KP-BNO055 use?
The M5Stamp-Pico VL53L4CX KP-BNO055 is built around the M5Stamp_Pico, from the RP2040/RP2350 family.
How big is the M5Stamp-Pico VL53L4CX KP-BNO055 PCB?
The M5Stamp-Pico VL53L4CX KP-BNO055 measures 80 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the M5Stamp-Pico VL53L4CX KP-BNO055?
20 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the M5Stamp-Pico VL53L4CX KP-BNO055 design files?
From the see-ranked/M5Stamp-Pico_VL53L4CX_KP-BNO055 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the M5Stamp-Pico VL53L4CX KP-BNO055 design in my own project?
The repository has no license, so all rights stay with see-ranked. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the M5Stamp-Pico VL53L4CX KP-BNO055 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k