Pcb HDMI2RGB

seniorDesignMAY1607·pcb_HDMI2RGB

This repository ships a schematic but no board layout.

About the Pcb HDMI2RGB

Pcb HDMI2RGB is an open source TI MSP430/CC PCB design by seniorDesignMAY1607, published on GitHub under the GPL-3.0 license. It is a board, with 114 components from 34 distinct parts.

Its main chip is the MSP430F2274TRHAR, from the TI MSP430/CC family. Other key parts include the TPD4S010DQAR, ABM3B-24.000MHZ-B2-T, TPS2061CDBVT, ADV7611 and SN74AUP1G06DCKR. By type, the board carries 41 capacitors, 34 resistors, 13 ICs, 7 inductors, 6 connectors and 6 diodes.

From the project

KiCad Design files for HDMI to 24Bit RGB converter used to drive DLP3010 TI EVM board.

Main components on the Pcb HDMI2RGB

TPD4S010DQARABM3B-24.000MHZ-B2-TTPS2061CDBVTADV7611MSP430F2274TRHARSN74AUP1G06DCKRSN74AUP1G07DCKRTPS62260DRVT

Pcb HDMI2RGB bill of materials (BOM)

114 components, 34 distinct parts.

QtyPartRefs
2
TPD4S010DQAR
U1, U2
1
ABM3B-24.000MHZ-B2-T
U3
1
TPS2061CDBVT
TPS2061
U4
1
ADV7611
U5
1
MSP430F2274TRHAR
U6
4
SN74AUP1G06DCKR
U7, U9, U12, U13
1
SN74AUP1G07DCKR
U8
2
TPS62260DRVT
TPS62260
U10, U11
1
HDMI_A
J1
1
QTH-030-L-D-A
QTH-030-02-L-DA
J2
1
RAPC712X
RAPC712x
J3
1
CONN_02X07
P1
2
CONN_01X06
P2, P3
3
HOLE1
H1, H2, H3
3
R_PACK8
RP1, RP2, RP3
1
2M1-SP1-T2-B4-M6RE
SW1
6
LTST-C190KGKT
LED
D1, D2, D3, D4, D5, D6
5
BLM18AG601SN1D
FILTER
FB1, FB2, FB3, FB4, FB5
2
LQM31PN2R2M00L
2.2uH
L1, L2
20
0402YD104KAT2A
0.1uF
C1, C2, C3, C4, C5, C6, C15, C16 +12
Show 14 more
QtyPartRefs
13
C0402C103K5RACTU
10nF
C7, C8, C9, C10, C11, C12, C20, C21 +5
2
06035A180JAT2A
18pF
C13, C14
4
C0805C106K4PACTU
10uF
C36, C37, C40, C41
2
C0805C475K8PACTU
4.7uF
C38, C39
6
CRCW06030000Z0EA
0.0
R1, R2, R6, R11, R15, R16
14
ERJ-2GEJ472X
4.7k
R3, R4, R5, R7, R12, R13, R14, R17 +6
2
CRCW040233R0FKED
33
R8, R9
1
CRCW040233R0FKED
33
R10
5
CRCW0402270RFKED
270
R24, R25, R26, R31, R34
1
CRCW0805200RFKEA
200
R27
1
CRCW0402270RFKED
270
R28
2
CRCW0402150KFKED
150k
R29, R30
1
ERJ-2RKF3003X
300k
R32
1
ERJ-2GEJ684X
680k
R33

Pcb HDMI2RGB design files

The KiCad project lives in the seniorDesignMAY1607/pcb_HDMI2RGB repository on GitHub; these links point at the commit this page was built from.

Pcb HDMI2RGB: common questions

What microcontroller does the Pcb HDMI2RGB use?

The Pcb HDMI2RGB is built around the MSP430F2274TRHAR, from the TI MSP430/CC family.

How many components are on the Pcb HDMI2RGB?

114 components, from 34 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pcb HDMI2RGB design files?

From the seniorDesignMAY1607/pcb_HDMI2RGB repository on GitHub, which has the schematic and a netlist; the links under Design files point to each one.

Can I use the Pcb HDMI2RGB design in my own project?

Yes, under the terms of its GPL-3.0 license, which seniorDesignMAY1607 chose for the repository.

Can I test firmware for the Pcb HDMI2RGB without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug TI MSP430/CC firmware against it before you order a PCB.

Similar boards