4 open source boards using the ADV7611

Real designs built with the ADV7611, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The ADV7611 in open source designs

The gallery holds 4 open source boards using the ADV7611 from 4 GitHub repositories; a typical one measures about 90 × 80 mm and carries around 303 components.

67% use four copper layers or more, and 100% carry an open source license.

The most starred is Glider by Modos-Labs.

Microcontrollers on boards using the ADV7611

What boards using the ADV7611 are built for

ADV7611: common questions

Where can I find a ADV7611 reference design?

Each of the 4 boards on this page is a real design using the ADV7611. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the ADV7611?

The CBTL02043A, FUSB302BMPX, INA3221, JW3651QFNE and LGS5145 appear in the most repositories here.

Which microcontrollers do boards using the ADV7611 use?

Most are built on STM32 (3) and TI MSP430/CC (1).

How big is a typical board using the ADV7611?

The median is 90 × 80 mm, and 33% are two-layer designs.

What is the most popular open source board using the ADV7611?

By GitHub stars, Glider by Modos-Labs, with 2,676 stars.

Can I simulate one of these boards using the ADV7611 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part