12v to usb c data splitter
Senyeah·12v-to-usb-c-data-splitter
About the 12v to usb c data splitter PCB
12v to usb c data splitter is an open source PCB design by Senyeah, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 52 × 40 mm, with 46 components from 35 distinct parts.
Other key parts include the MPQ4228GRE-C-AEC1-Z. By type, the board carries 21 capacitors, 11 resistors, 6 diodes, 4 inductors, 3 connectors and 1 IC.
It belongs with the power & battery designs in this gallery.
From the project
Car 12 V to USB-C 5 V 3 A (15 W) charger that passes the stereo's USB data through to the phone. KiCad 10, JLCPCB-ready.
A car board that turns 12 V into 5 V at 3 A (15 W) on a USB-C socket for the phone, and passes the factory stereo's USB data through to the same phone. I made it for a car stereo that talks to the phone over the old iPod USB protocol, and an iPhone 15 Pro. The board does not use USB PD, so the iPhone keeps its USB data link to the stereo while it charges.
- Converter and USB switch: MPS MPQ4228-C (AEC-Q100), 420 kHz, line-drop compensation, BC1.2 CDP and Type-C Rp. - Input: 2-pin 5.08 mm screw terminal, SMBJ33CA TVS, SS510 (100 V) reverse diode, LC filter. - Stereo side: USB-B socket (J2).…

Main components on the 12v to usb c data splitter
12v to usb c data splitter bill of materials (BOM)
46 components, 35 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MPQ4228GRE-C-AEC1-Z MPQ4228GRE-C-AEC1 | MPS_QFN-22_4x4mm_P0.5mm | U1 |
| 1 | C7509570 12V IN | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | C19944605 USB-B from stereo | USB_B_OST_USB-B1HSxx_Horizontal | J2 |
| 1 | C165948 USB-C to phone | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |
| 1 | SMBJ33CA | D_SMB | D1 |
| 1 | SS510 | D_SMA | D2 |
| 2 | PESD5V0U1UA | D_SOD-323 | D3, D4 |
| 1 | C2290 White LED | LED_0603_1608Metric | D5 |
| 1 | C2286 FAULT red | LED_0603_1608Metric | D6 |
| 1 | C6808109 4.7uH 3.6A | L_APV_ANR6045 | L1 |
| 1 | C7423318 2.2uH 4.7A | L_Changjiang_FTC303020D | L2 |
| 2 | C21189 0R | L_0603_1608Metric | L3, L4 |
| 1 | C19184158 100uF 50V | CP_Elec_8x10.5 | C1 |
| 2 | C20416422 4.7uF 50V | C_0805_2012Metric | C2, C3 |
| 2 | C14663 100nF 50V | C_0603_1608Metric | C4, C13 |
| 1 | 1UF 1uF | C_0603_1608Metric | C5 |
| 1 | 4.7UF 4.7uF | C_0603_1608Metric | C6 |
| 2 | 220NF 220nF | C_0603_1608Metric | C7, C25 |
| 2 | C21122 22nF 50V | C_0603_1608Metric | C11, C12 |
| 2 | C13585 10uF 50V | C_1206_3216Metric | C14, C27 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C14663 100nF | C_0603_1608Metric | C20 |
| 4 | C12891 22uF 25V | C_1206_3216Metric | C21, C22, C23, C24 |
| 1 | C1671 47pF C0G | C_0603_1608Metric | C26 |
| 1 | 2.2NF 2.2nF | C_0603_1608Metric | C28 |
| 1 | 3.3pF | C_0603_1608Metric | C29 |
| 1 | 100K 100k | R_0603_1608Metric | R1 |
| 1 | C23147 36k 1% | R_0603_1608Metric | R2 |
| 1 | 10K 10k | R_0603_1608Metric | R3 |
| 1 | 0603WAF470KT5E 4.7R | R_0603_1608Metric | R4 |
| 1 | 10R | R_0603_1608Metric | R5 |
| 1 | 20K 20k | R_0603_1608Metric | R6 |
| 1 | 0603WAF4422T5E 30k 1% | R_0603_1608Metric | R7 |
| 1 | C23189 5.6k 1% | R_0603_1608Metric | R8 |
| 1 | C21189 0R | R_0603_1608Metric | R9 |
| 2 | 1k | R_0603_1608Metric | R10, R11 |
12v to usb c data splitter design files
The KiCad project lives in the Senyeah/12v-to-usb-c-data-splitter repository on GitHub; these links point at the commit this page was built from.
12v to usb c data splitter: common questions
How big is the 12v to usb c data splitter PCB?
The 12v to usb c data splitter measures 52 × 40 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the 12v to usb c data splitter?
46 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 12v to usb c data splitter design files?
From the Senyeah/12v-to-usb-c-data-splitter repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 12v to usb c data splitter design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which Senyeah chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k