HW-Afterburner
serhaturtis·HW-Afterburner·project/afterburner.kicad_pcb
About the HW-Afterburner PCB
HW-Afterburner is an open source PCB design by serhaturtis, published on GitHub. It is a 2-layer board measuring 52.1 × 54.6 mm, with 47 components from 24 distinct parts.
Other key parts include the TL072P. By type, the board carries 18 resistors, 10 capacitors, 4 jumpers, 3 diodes, 2 transformers and 1 IC.
It belongs with the audio designs in this gallery.
From the project
An Ibanez TS-9 Clone Board
This is an overdrive guitar effects board, "inspired" by the Ibanez Tube Screamer 9.
I wanted to test the effects so that I can use them on another project. So I made standalone clone boards. This is one of them.
This is imported from Eagle to KiCad 6 while I was backing up my projects. So the schematic's look is a bit janky.
Diodes are used for clipping, can experiment with different combinations, LEDs etc.

Main components on the HW-Afterburner
HW-Afterburner bill of materials (BOM)
47 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL072P | DIL08 | IC1 |
| 4 | — | @HOLE0, @HOLE1, @HOLE2, @HOLE3 | |
| 4 | — | 1X02 | JP1, JP2, JP3, JP4 |
| 5 | — | MA03-1 | SV1, SV2, SV3, SV11, SV12 |
| 2 | 2N5088 | TO92 | T1, T2 |
| 2 | 1N4148DO35-7 | DO35-7 | D1, D2 |
| 1 | S1M | SMA | D6 |
| 1 | 270nF | C0805 | C1 |
| 1 | 1uF | C0805 | C2 |
| 1 | 47uF | UD-6,3X5,8_NICHICON | C3 |
| 1 | 47nF | C0805 | C4 |
| 1 | 51pF | C0805 | C5 |
| 3 | 220nF | C0805 | C6, C7, C8 |
| 1 | 100nF | C0805 | C9 |
| 1 | 10uF | UD-4X5,8_NICHICON | C10 |
| 4 | 1k | R0805 | R1, R9, R12, R13 |
| 2 | 510k | R0805 | R2, R14 |
| 6 | 10k | R0805 | R3, R5, R6, R7, R10, R15 |
| 1 | 4k7 | R0805 | R4 |
| 1 | 51k | R0805 | R8 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 220R | R0805 | R11 |
| 1 | 470R | R0805 | R16 |
| 1 | 100k | R0805 | R17 |
| 1 | 450r | R0805 | R27 |
HW-Afterburner design files
The KiCad project lives in the serhaturtis/HW-Afterburner repository on GitHub; these links point at the commit this page was built from.
- Layoutproject/afterburner.kicad_pcb
- Schematicproject/afterburner.kicad_sch
HW-Afterburner: common questions
How big is the HW-Afterburner PCB?
The HW-Afterburner measures 52.1 × 54.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the HW-Afterburner?
47 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the HW-Afterburner design files?
From the serhaturtis/HW-Afterburner repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the HW-Afterburner design in my own project?
The repository has no license, so all rights stay with serhaturtis. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687