HW-Pitch Black Forest
serhaturtis·HW-Pitch_Black_Forest·project/pitch_black_forest_v01.kicad_pcb
About the HW-Pitch Black Forest PCB
HW-Pitch Black Forest is an open source PCB design by serhaturtis, published on GitHub. It is a 2-layer board measuring 91.4 × 40.6 mm, with 82 components from 36 distinct parts.
Other key parts include the BAT85. By type, the board carries 28 resistors, 24 capacitors, 6 transistors, 5 jumpers, 4 ICs and 1 diode.
It belongs with the audio designs in this gallery.
From the project
A Preamp Inspired By Ueberschall
This is a two stage guitar preamp board with gain, treble, mid, bass, voicing, filter bands and volume controls. And a boost switch.
Because I wanted to experiment with JFETs and also have a small preamp board that I was going to use on another project.
This is imported from Eagle to KiCad 6 while I was backing up my projects. So the schematic's look is a bit janky.

Main components on the HW-Pitch Black Forest
HW-Pitch Black Forest bill of materials (BOM)
82 components, 36 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | BAT85 | SOD68 | U$1, U$2, U$3, U$4 |
| 6 | J201 | TO92 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 4 | — | @HOLE0, @HOLE1, @HOLE2, @HOLE3 | |
| 5 | — | 1X02 | JP1, JP2, JP3, JP4, JP5 |
| 10 | — | MA03-1 | SV1, SV2, SV3, SV4, SV5, SV6, SV7, SV8 +2 |
| 1 | S1M | SMA | D6 |
| 1 | 22pF | C0805 | C1 |
| 1 | 470pF | C0805 | C2 |
| 3 | 2.2nF | C0805 | C3, C5, C12 |
| 1 | 4.7uF | UD-4X5,8_NICHICON | C4 |
| 2 | 100uF | UD-6,3X5,8_NICHICON | C6, C23 |
| 2 | 1nF | C0805 | C7, C14 |
| 1 | 100pF | C0805 | C8 |
| 6 | 22nF | C0805 | C9, C11, C15, C19, C20, C21 |
| 2 | 470nF | C0805 | C10, C22 |
| 1 | 2.2uF | UD-4X5,8_NICHICON | C13 |
| 1 | 1uF | C0805 | C16 |
| 1 | 270pF | C0805 | C17 |
| 1 | 220pF | C0805 | C18 |
| 1 | 220uF | UD-10X10_NICHICON | C24 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1M | R0805 | R1 |
| 3 | 68k | R0805 | R2, R6, R8 |
| 1 | 1k8 | R0805 | R3 |
| 4 | 100k | RJ9W | R4, R10, R16, R21 |
| 2 | 10k | R0805 | R5, R25 |
| 2 | 100k | R0805 | R7, R26 |
| 1 | 2k4 | R0805 | R9 |
| 4 | 470k | R0805 | R11, R17, R18, R23 |
| 2 | 330k | R0805 | R12, R13 |
| 2 | 1k5 | R0805 | R14, R15 |
| 1 | 1k | R0805 | R19 |
| 1 | 820r | R0805 | R20 |
| 1 | 22k | R0805 | R22 |
| 1 | 100r | R0805 | R24 |
| 1 | 470r | R0805 | R27 |
| 1 | 450r | R0805 | R28 |
HW-Pitch Black Forest design files
The KiCad project lives in the serhaturtis/HW-Pitch_Black_Forest repository on GitHub; these links point at the commit this page was built from.
HW-Pitch Black Forest: common questions
How big is the HW-Pitch Black Forest PCB?
The HW-Pitch Black Forest measures 91.4 × 40.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the HW-Pitch Black Forest?
82 components, from 36 distinct parts. The full bill of materials is listed on this page.
Where can I download the HW-Pitch Black Forest design files?
From the serhaturtis/HW-Pitch_Black_Forest repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the HW-Pitch Black Forest design in my own project?
The repository has no license, so all rights stay with serhaturtis. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687