Electronics boards
sgiraz·electronics-boards·unicorn/kicad/unicorn.kicad_pcb
About the Electronics boards PCB
Electronics boards is an open source AVR/Arduino PCB design by sgiraz, published on GitHub under the BSD-3-Clause license. It is a 2-layer board measuring 35 × 75 mm, with 25 components from 21 distinct parts.
Its main chip is the ATmega328-P, from the AVR/Arduino family. Other key parts include the L7805. By type, the board carries 6 capacitors, 5 resistors, 4 connectors, 4 LEDs, 2 ICs and 1 diode.
From the project
Repository containing custom electronics boards
The Unicorn Board, designed by Simone Girardi in 2022, is a compact, Arduino-like programmable board. It's equipped with service LEDs for TX and RX, making it a versatile tool for various microcontroller projects.
- ATmega328P Microcontroller: Powers your projects. - 16MHz Crystal Oscillator: Provides a stable clock signal. - Input Voltage: Accepts an external power supply ranging from 7V to 12V. - 7805 Voltage Regulator: Ensures a steady 5V supply to the microcontroller and other components. - TX and RX LEDs: Offer visual feedback for data transmission and reception. - ISP Header…

Main components on the Electronics boards
Electronics boards bill of materials (BOM)
25 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L7805 | TO255P1020X450X2000-3 | U1 |
| 1 | ATmega328-P | DIP-28_W7.62mm | U2 |
| 1 | Conn_01x02 | JST_S2B-PH-SM4-TB | J1 |
| 1 | SPI | PinHeader_2x03_P2.54mm_Vertical | J2 |
| 2 | Conn_01x14_Female | PinSocket_1x14_P2.54mm_Vertical | J3, J4 |
| 1 | 16MHz | Crystal_HC49-4H_Vertical | Crystal1 |
| 1 | Reset | SW_PUSH_6mm | RST1 |
| 1 | PWR | LED_D3.0mm | LED1 |
| 1 | RST | LED_D3.0mm | LED2 |
| 1 | TX | LED_0402_1005Metric | LED3 |
| 1 | RX | LED_0402_1005Metric | LED4 |
| 1 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | 10uH | L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L1 |
| 1 | 100uF | CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 10uF | CP_Radial_D5.0mm_P2.00mm | C2 |
| 2 | 100nF | C_Disc_D3.8mm_W2.6mm_P2.50mm | C3, C6 |
| 2 | 22pF | C_Disc_D3.8mm_W2.6mm_P2.50mm | C4, C5 |
| 2 | 330 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R3 |
| 1 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | RB | R_0402_1005Metric | R4 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RG | R_0402_1005Metric | R5 |
Electronics boards design files
The KiCad project lives in the sgiraz/electronics-boards repository on GitHub; these links point at the commit this page was built from.
Electronics boards: common questions
What microcontroller does the Electronics boards use?
The Electronics boards is built around the ATmega328-P, from the AVR/Arduino family.
How big is the Electronics boards PCB?
The Electronics boards measures 35 × 75 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Electronics boards?
25 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Electronics boards design files?
From the sgiraz/electronics-boards repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Electronics boards design in my own project?
Yes, under the terms of its BSD-3-Clause license, which sgiraz chose for the repository.
Can I test firmware for the Electronics boards without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k