DC-Motor-Speed-Controller
ShaanJ1·DC-Motor-Speed-Controller·PCB/pwm-motor-controller.kicad_pcb
About the DC-Motor-Speed-Controller PCB
DC-Motor-Speed-Controller is an open source PCB design by ShaanJ1, published on GitHub. It is a 2-layer board measuring 39 × 53.8 mm, with 36 components from 18 distinct parts.
Other key parts include the LMC555XM. By type, the board carries 11 resistors, 10 connectors, 5 transistors, 5 diodes, 2 capacitors and 1 IC.
It belongs with the robotics & motion designs in this gallery.
From the project
I made this as Version 2 of my motor controller for my V8 Engine project, as that board failed to work entirely because of bad design.
Main components on the DC-Motor-Speed-Controller
DC-Motor-Speed-Controller bill of materials (BOM)
36 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LMC555XM LMC555xM | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Motor_DC | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | M1 |
| 1 | NMOS | SOT-23 | Q2 |
| 2 | MMBT2222A | SOT-23 | Q3, Q6 |
| 1 | SI2319CDS Si2319CDS | SOT-23 | Q4 |
| 1 | NMOS | TO-263-2 | Q5 |
| 1 | SCREW_TERMINAL_01X02 Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 9 | CONN_01X01 Conn_01x01 | TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | J2, J3, J4, J5, J6, J7, J8, J9 +1 |
| 1 | Fuse | Fuse_2920_7451Metric | F1 |
| 1 | D_Zener | D_SOD-123 | D1 |
| 1 | D | TO-220-3_Horizontal_TabDown | D3 |
| 1 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 2 | D | Nexperia_CFP3_SOD-123W | D5, D6 |
| 1 | 100NF 100nF | GRMJN65C1H104JE01D | C1 |
| 1 | 0.01UF 0.01uF | C_0603_1608Metric | C2 |
| 5 | 10K | R_0603_1608Metric | R1, R5, R6, R8, R11 |
| 1 | 4.7K | R_0603_1608Metric | R2 |
| 5 | 1K | R_0603_1608Metric | R3, R4, R7, R9, R10 |
DC-Motor-Speed-Controller design files
The KiCad project lives in the ShaanJ1/DC-Motor-Speed-Controller repository on GitHub; these links point at the commit this page was built from.
DC-Motor-Speed-Controller: common questions
How big is the DC-Motor-Speed-Controller PCB?
The DC-Motor-Speed-Controller measures 39 × 53.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DC-Motor-Speed-Controller?
36 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DC-Motor-Speed-Controller design files?
From the ShaanJ1/DC-Motor-Speed-Controller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the DC-Motor-Speed-Controller design in my own project?
The repository has no license, so all rights stay with ShaanJ1. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979