13 open source boards using the LMC555xM
Real designs built with the LMC555xM, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Mycelium
microresearch
74.5 × 83.7 mm126 parts2LGPL-3.05NoCIC
hkzlab
9.5 × 20.6 mm15 parts2LCC-BY-NC-4.02JL-rev1
acastles91
500 × 272.5 mm298 parts4LNo license0Stall detect motor driver
anthony-bernaert
56 × 54 mm69 parts2LCERN-OHL-P-2.00DC-Motor-Speed-Controller
ShaanJ1
39 × 53.8 mm36 parts2LNo license0AVR/Arduino
Mycleium pcb before thereminchange
microresearch
74.5 × 83.7 mm126 parts2LGPL-3.05JL checkpoint
acastles91
1204.3 × 557.2 mm223 parts4LNo license0Main board rev1
acastles91
480 × 172.5 mm145 parts4LNo license0RP2040/RP2350
Power Supply Brain
cdagher
59 × 84 mm101 parts4LMIT0OIS L
derdds
40 × 50 mm30 parts2LNo license0Mycelium pcb sensor
microresearch
74.5 × 83.7 mm38 parts2LGPL-3.05Timer usb board v0 2
miniscope
40 × 40 mm29 parts4LCERN-OHL-S-2.02Clock generator
jerry-kerenzikov
100 × 36 mm41 parts4LCERN-OHL-S-2.00
How designs wire the LMC555xM
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the LMC555xM connects to, and the resistors, capacitors and other passives placed on it.
- The THR pin has a capacitor to GND on 7 of 9 designs, most often 100 nF (then 10 µF).
- The R pin is tied to 3.3V on 8 of 9 designs.
- The TR pin has a capacitor to GND on 6 of 9 designs, most often 100 nF (then 600 pF).
- The Q pin has a series resistor on 6 of 9 designs, most often 1 kΩ (then 150 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| TRpin 2 | Connected to: Signal 89% |
|
| Qpin 3 | Connected to: Signal 100% |
|
| Rpin 4 | Connected to: 3.3V 89% | — |
| CVpin 5 | Connected to: Signal 56% · not connected 44% |
|
| THRpin 6 | Connected to: Signal 89% |
|
| DISpin 7 | Connected to: Signal 67% · not connected 33% |
|
| VCCpin 8 | Connected to: 3.3V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mycelium pcb by microresearch, NoCIC by hkzlab, Timer usb board v0 2 by miniscope and JL checkpoint by acastles91.
The LMC555xM in open source designs
The gallery holds 13 open source boards using the LMC555xM from 9 GitHub repositories; a typical one measures about 74.5 × 83.7 mm and carries around 69 components.
54% are two-layer designs, the rest use four layers or more, and 54% carry an open source license.
The most starred is Mycleium pcb before thereminchange by microresearch.
Microcontrollers on boards using the LMC555xM
What boards using the LMC555xM are built for
LMC555xM: common questions
Where can I find a LMC555xM reference design?
Each of the 13 boards on this page is a real design using the LMC555xM. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LMC555xM THR pin connected?
The THR pin has a capacitor to GND on 7 of 9 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 9 open source designs using the LMC555xM.
How is the LMC555xM R pin connected?
The R pin is tied to 3.3V on 8 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the LMC555xM.
How is the LMC555xM TR pin connected?
The TR pin has a capacitor to GND on 6 of 9 designs, most often 100 nF (then 600 pF). Counted from the KiCad layouts of 9 open source designs using the LMC555xM.
Which microcontrollers do boards using the LMC555xM use?
Most are built on AVR/Arduino (2) and RP2040/RP2350 (1).
How big is a typical board using the LMC555xM?
The median is 74.5 × 83.7 mm, and 54% are two-layer designs.
What is the most popular open source board using the LMC555xM?
By GitHub stars, Mycleium pcb before thereminchange by microresearch, with 5 stars.
Can I simulate one of these boards using the LMC555xM before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.