Hv isol meas
shabaz123·hv_isol_meas·kicad_src/hv-isol-meas.kicad_pcb
About the Hv isol meas PCB
Hv isol meas is an open source PCB design by shabaz123, published on GitHub. It is a 2-layer board measuring 98.9 × 48.9 mm, with 56 components from 31 distinct parts.
Other key parts include the OPA2197DGK, MCP1541-TT, OPA197xDBV, DC-DC-SIP-DUAL-ISOL and MCP1541T. By type, the board carries 20 capacitors, 16 resistors, 7 inductors, 6 ICs, 3 connectors and 2 test points.
It belongs with the test & measurement designs in this gallery.
From the project
Isolated HV Measurement Board
High Voltage Isolated Measurement Board ===========================================
Introduction ------------ This repository contains hardware files for constructing an isolated high voltage interface board, that output 4mV per volt, allowing measurements up to the kilovolt range (the range can be modified by changing some resistor values).
Specifications (currently untested) -----------------------------------
Main components on the Hv isol meas
Hv isol meas bill of materials (BOM)
56 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | OPA2197DGK | VSSOP-8-DGK-TI | U1 |
| 1 | MCP1541-TT | SOT-23-hand-solder | U2 |
| 1 | OPA197xDBV | SOT-23-5 | U3 |
| 1 | DC-DC-SIP-DUAL-ISOL | DCDC-1W | U4 |
| 1 | MCP1541T | SOT-23-hand-solder | U5 |
| 1 | TPS60403 | SOT23-5 | U6 |
| 1 | MEAS_OUT | RF-Conn-Vert | J1 |
| 1 | PSU_IN | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | DC-Socket | DC-Jack-10 | J3 |
| 1 | HCNR200 | HCRN200 | OPTO1 |
| 1 | HV- | TestPoint_Plated_Hole_1.8mm | TP1 |
| 1 | HV+ | TestPoint_Plated_Hole_1.8mm | TP2 |
| 1 | LED | LED_1210_3225Metric_Pad1.42x2.65mm_HandSolder | D3 |
| 2 | FB_0805 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | FB1, FB2 |
| 3 | 2mH | SRF0905A | L1, L2, L3 |
| 2 | 200uH | CHOKE_CM_1210 | L4, L5 |
| 10 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C5, C6, C13, C16, C17 +2 |
| 4 | 10u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C9, C14, C15 |
| 2 | 10p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8 |
| 3 | 47u | CP_Radial_D6.3mm_P2.50mm | C10, C11, C12 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C19 |
| 2 | 47k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R4 |
| 1 | 0R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 300R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 3 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R8, R13 |
| 1 | 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 2 | 0R | R_2512_CRHP | R7, R17 |
| 2 | 500M | R_2512_CRHP | R10, R12 |
| 1 | 39k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 2 | 82k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14, R15 |
| 1 | 47R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18 |
Hv isol meas design files
The KiCad project lives in the shabaz123/hv_isol_meas repository on GitHub; these links point at the commit this page was built from.
Hv isol meas: common questions
How big is the Hv isol meas PCB?
The Hv isol meas measures 98.9 × 48.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hv isol meas?
56 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the Hv isol meas design files?
From the shabaz123/hv_isol_meas repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Hv isol meas design in my own project?
The repository has no license, so all rights stay with shabaz123. Use it as a reference, and ask the author before reusing the design.
Similar boards
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kEleLab v2 Frontpanel a
Chrismettal
88 × 25 mm23 parts2LGPL-3.0528EleLab v2 Bus150
Chrismettal
150 × 50 mm37 parts2LGPL-3.0528EleLab v2 PowerFeed
Chrismettal
68 × 50 mm11 parts2LGPL-3.0528