6 open source boards using the TPS60403

Real designs built with the TPS60403, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the TPS60403

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS60403 connects to, and the resistors, capacitors and other passives placed on it.

  • The OUT pin has a capacitor to GND on 5 of 5 designs, most often 1 µF (then 4.7 µF).
  • The C- pin has a series capacitor on 5 of 5 designs, most often 1 µF.
  • The C+ pin has a series capacitor on 5 of 5 designs, most often 1 µF.
  • The IN pin is tied to 3.3V on 4 of 5 designs.
OUTpin 1Connected to: Signal 60% · -3.3V 40%
  • Capacitor to GND on 100% · 1 µF (4), 4.7 µF (1)
  • Series resistor on 40% · 10 Ω (4)
INpin 2Connected to: 3.3V 80% · a signal 20%
C-pin 3Connected to: Signal 100%
  • Series capacitor on 100% · 1 µF (5)
GNDpin 4Connected to: GND 100%
C+pin 5Connected to: Signal 100%
  • Series capacitor on 100% · 1 µF (5)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Brainboard wearable v2 by gskelly, Esr meter by vpatkov, PowerSupply by DanHert and MOST25-to-AUDIO by Oleg-mk.

The TPS60403 in open source designs

The gallery holds 6 open source boards using the TPS60403 from 5 GitHub repositories; a typical one measures about 76.2 × 57.3 mm and carries around 103 components.

75% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.

The most starred is Brainboard wearable v2 by gskelly.

Parts used alongside the TPS60403

Microcontrollers on boards using the TPS60403

TPS60403: common questions

Where can I find a TPS60403 reference design?

Each of the 6 boards on this page is a real design using the TPS60403. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPS60403 OUT pin connected?

The OUT pin has a capacitor to GND on 5 of 5 designs, most often 1 µF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the TPS60403.

How is the TPS60403 C- pin connected?

The C- pin has a series capacitor on 5 of 5 designs, most often 1 µF. Counted from the KiCad layouts of 5 open source designs using the TPS60403.

How is the TPS60403 C+ pin connected?

The C+ pin has a series capacitor on 5 of 5 designs, most often 1 µF. Counted from the KiCad layouts of 5 open source designs using the TPS60403.

Which microcontrollers do boards using the TPS60403 use?

Most are built on AVR/Arduino (1), ESP32 (1) and STM32 (1).

How big is a typical board using the TPS60403?

The median is 76.2 × 57.3 mm, and 75% are two-layer designs.

What is the most popular open source board using the TPS60403?

By GitHub stars, Brainboard wearable v2 by gskelly, with 21 stars.

Can I simulate one of these boards using the TPS60403 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part