6 open source boards using the MCP1541-TT
Real designs built with the MCP1541-TT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
DonCon2040
ravinrabbid
130.8 × 58.4 mm99 parts2LMIT64ESP32
Felső panel
NBence0
120.1 × 70.2 mm274 parts6LNo license0AVR/Arduino
H9ps
c3h9dx
70 × 60 mm69 parts2LNo license0Hv isol meas
shabaz123
98.9 × 48.9 mm56 parts2LNo license00034 DAC Module MCP4922
AirchipTeknoloji
40 × 30 mm14 parts2LNo license0RP2040/RP2350
DonConIOmini
ravinrabbid
54 × 64 mm89 parts2LMIT64
How designs wire the MCP1541-TT
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MCP1541-TT connects to, and the resistors, capacitors and other passives placed on it.
- The VOUT pin has a capacitor to GND on 3 of 5 designs, most often 10 µF (then 1 µF).
- The VIN pin has a decoupling capacitor on 2 of 5 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: 5V 100% |
|
| VOUTpin 2 | Connected to: Signal 100% |
|
| VSSpin 3 | Connected to: GND 80% · a signal 20% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DonCon2040 by ravinrabbid, 0034 DAC Module MCP4922 by AirchipTeknoloji, H9ps by c3h9dx and Felső panel by NBence0.
The MCP1541-TT in open source designs
The gallery holds 6 open source boards using the MCP1541-TT from 5 GitHub repositories; a typical one measures about 84.4 × 59.2 mm and carries around 79 components.
83% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is DonCon2040 by ravinrabbid.
Microcontrollers on boards using the MCP1541-TT
What boards using the MCP1541-TT are built for
MCP1541-TT: common questions
Where can I find a MCP1541-TT reference design?
Each of the 6 boards on this page is a real design using the MCP1541-TT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MCP1541-TT VOUT pin connected?
The VOUT pin has a capacitor to GND on 3 of 5 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the MCP1541-TT.
What decoupling capacitors do designs use on the MCP1541-TT VIN pin?
The VIN pin has a decoupling capacitor on 2 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the MCP1541-TT.
Which microcontrollers do boards using the MCP1541-TT use?
Most are built on AVR/Arduino (1), ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the MCP1541-TT?
The median is 84.4 × 59.2 mm, and 83% are two-layer designs.
What is the most popular open source board using the MCP1541-TT?
By GitHub stars, DonCon2040 by ravinrabbid, with 64 stars.
Can I simulate one of these boards using the MCP1541-TT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.