Simple dcr
shabaz123·simple_dcr
About the Simple dcr PCB
Simple dcr is an open source PCB design by shabaz123, published on GitHub. It is a 2-layer board measuring 160 × 100 mm, with 98 components from 40 distinct parts.
By type, the board carries 23 capacitors, 19 resistors, 17 connectors, 5 transistors, 5 diodes and 3 inductors.
It belongs with the audio designs in this gallery.
From the project
Simple Direct Conversion Receiver for 40m (7 MHz) Band
This project is based on https://hackaday.io/project/190327/files
The main difference is that the project has been converted to a printed circuit board layout.
To order a PCB, Click here for the PCB Gerber Zip File and then upload it to any PCB manufacturer. The board is 2-layer, 160 x 100 mm in size.
The 3D-print file for constructing the variable inductor is available from the Hackaday website (direct link to the file).

Simple dcr bill of materials (BOM)
98 components, 40 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 2N3904 | TO-92-soldersmoke | Q1, Q3, Q4, Q5 |
| 1 | J310 | TO-92-JFET-soldersmoke | Q2 |
| 1 | Antenna | TerminalBlock_2way-3.5-3.81mm | J1 |
| 1 | Speaker | TerminalBlock_2way-3.5-3.81mm | J2 |
| 1 | 9V Battery | TerminalBlock_2way-3.5-3.81mm | J3 |
| 14 | ~ | PinHeader_1x02_P2.54mm_Vertical | J4, J5, J6, J7, J8, J9, J10, J11 +6 |
| 10 | ~ | mousebites-imperial-5-trackgap | H1, H2, H4, H5, H8, H10, H12, H13 +2 |
| 9 | ~ | mousebites-imperial-5 | H3, H6, H7, H9, H11, H14, H15, H19 +1 |
| 1 | On/Off Toggle | SPDT-RA | SW1 |
| 2 | T50-6 Iron | soldersmoke-toroid-ferrite-12.7 | TR1, TR2 |
| 2 | FT50-43 Ferrite | soldersmoke-toroid-CT-12.7 | TR3, TR4 |
| 1 | Audio 1k/8R | soldersmoke-audio-transformer | TR5 |
| 1 | 1k | Potentiometer_soldersmoke | VR1 |
| 1 | BZX55C8V2 | D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 4 | 1N5819 | D_DO-41_SOD81_P10.16mm_Horizontal_soldersmoke | D2, D3, D4, D5 |
| 1 | 19 Turns | variable-inductor-soldersmoke | L1 |
| 1 | 10u | L_Axial_L9.5mm_D4.0mm_P12.70mm_Horizontal_Fastron_SMCC | L2 |
| 1 | 100uH | L_Axial_L9.5mm_D4.0mm_P12.70mm_Horizontal_Fastron_SMCC | L11 |
| 2 | 660p | C_Disc_Parallel_plus_1206_SMD_D3.0mm_W1.6mm_P5.0 | C1, C2 |
| 1 | 130p | C_Disc_D3.0mm_W1.6mm_P5.0 | C3 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 0.1u | C_Disc_D3.0mm_W1.6mm_P5.0 | C4, C5, C6, C7 |
| 2 | 10u | CP_Radial_D5.0mm_P2.50mm | C8, C14 |
| 3 | 470u | CP_Radial_D8mm_P3.5mm | C9, C11, C13 |
| 2 | 47u | CP_Radial_D6.3mm_P2.50mm | C10, C15 |
| 1 | 47u | CP_Radial_D5.0mm_P2.50mm | C12 |
| 1 | 0.47u | C_Disc_D3.0mm_W1.6mm_P5.0 | C16 |
| 1 | 33u | CP_Radial_D5.0mm_P2.50mm | C17 |
| 2 | 165p | C_Disc_Series_plus_1206_SMD_D3.0mm_W1.6mm_P5.0 | C18, C19 |
| 1 | 10p | C_Disc_D3.0mm_W1.6mm_P5.0 | C20 |
| 3 | Optional | C_Trim_Multisized | C21, C22, C23 |
| 2 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 1 | 3.3k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 3 | 100R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R6, R14 |
| 1 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 47R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 3 | 15k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8, R12, R16 |
| 3 | 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9, R13, R17 |
| 2 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10, R18 |
| 2 | 470R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11, R19 |
| 1 | 220R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R20 |
Simple dcr design files
The KiCad project lives in the shabaz123/simple_dcr repository on GitHub; these links point at the commit this page was built from.
Simple dcr: common questions
How big is the Simple dcr PCB?
The Simple dcr measures 160 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Simple dcr?
98 components, from 40 distinct parts. The full bill of materials is listed on this page.
Where can I download the Simple dcr design files?
From the shabaz123/simple_dcr repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Simple dcr design in my own project?
The repository has no license, so all rights stay with shabaz123. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687