ESP32PICOV3
shades66·OddsAndEnds·ESP32Boards/ESP32-Pico-V2-MiniPICO/ESP32PICOV3.kicad_pcb
About the ESP32PICOV3 PCB
ESP32PICOV3 is an open source RP2040/RP2350 PCB design by shades66, published on GitHub. It is a 4-layer board measuring 29.3 × 12.1 mm, with 26 components from 15 distinct parts.
Its main chip is the ESP32-PICO-V3, from the RP2040/RP2350 family. Other key parts include the AP2112K-3.3. By type, the board carries 13 capacitors, 4 resistors, 3 diodes, 2 ICs, 2 connectors and 1 antenna.
It belongs with the sensors and usb & debug tools designs in this gallery.
From the project
Just odds and ends I've saved for a rainy day
(Best viewed as raw to get the formatting. broke when I created it :( )
Some of the boards I've been making for use a base boards for various Home Assistant & Other odds and ends
CH340-Programmer - Board that contains the pins that match up with the pins on the V1.1 & V2 boards for programming USB-C-Board - Small board for holding a USB C SMD connector / related 5.1k resistors & header for 4 pins to other boards like the CH340 programmer & V1.1 board V1 - ESP32 WROVER based board includes on board CH340 chip for programming , pins for connecting LED strips & badly aligned headers for other…
Main components on the ESP32PICOV3
ESP32PICOV3 bill of materials (BOM)
26 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-PICO-V3 | QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm | U1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U3 |
| 1 | Conn_02x03_Odd_Even | PinHeader_2x03_P2.00mm_Vertical | J1 |
| 1 | Conn_01x08_Socket | Hirose_DF13-08P-1.25DSA_1x08_P1.25mm_Vertical | J2 |
| 1 | Antenna | U.FL_Hirose_U.FL-R-SMT-1_Vertical | AE1 |
| 1 | WS2812B | WS2812_2020 | D1 |
| 2 | LED | LED_0603_1608Metric | D2, D3 |
| 1 | 1.8nH | L_0603_1608Metric | L1 |
| 4 | 1uF | C_0402_1005Metric | C1, C8, C9, C11 |
| 2 | 1.5pF | C_0402_1005Metric | C2, C3 |
| 5 | 100nF | C_0402_1005Metric | C4, C5, C10, C12, C13 |
| 2 | 10uF | C_0603_1608Metric | C6, C7 |
| 1 | 10K | R_0402_1005Metric | R1 |
| 1 | 47R | R_0402_1005Metric | R2 |
| 2 | 330R | R_0402_1005Metric | R3, R4 |
ESP32PICOV3 design files
The KiCad project lives in the shades66/OddsAndEnds repository on GitHub; these links point at the commit this page was built from.
ESP32PICOV3: common questions
What microcontroller does the ESP32PICOV3 use?
The ESP32PICOV3 is built around the ESP32-PICO-V3, from the RP2040/RP2350 family.
How big is the ESP32PICOV3 PCB?
The ESP32PICOV3 measures 29.3 × 12.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the ESP32PICOV3?
26 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the ESP32PICOV3 design files?
From the shades66/OddsAndEnds repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ESP32PICOV3 design in my own project?
The repository has no license, so all rights stay with shades66. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP32PICOV3 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in OddsAndEnds
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k