Esp32-s3-dev

shades66·OddsAndEnds·ESP32Boards/V2/esp32-s3-dev.kicad_pcb

Esp32-s3-dev PCB layout, top view — open source ESP32 board by shades66

About the Esp32-s3-dev PCB

Esp32-s3-dev is an open source ESP32 PCB design by shades66, published on GitHub. It is a 2-layer board measuring 46.6 × 32.7 mm, with 48 components from 20 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the USBLC6-2SC6, AMS1117-3.3 and LIS3DH. By type, the board carries 11 connectors, 11 diodes, 11 capacitors, 6 resistors, 5 ICs and 2 jumpers.

It belongs with the sensors, iot & wireless and usb & debug tools designs in this gallery.

From the project

Just odds and ends I've saved for a rainy day

(Best viewed as raw to get the formatting. broke when I created it :( )

Some of the boards I've been making for use a base boards for various Home Assistant & Other odds and ends

CH340-Programmer - Board that contains the pins that match up with the pins on the V1.1 & V2 boards for programming USB-C-Board - Small board for holding a USB C SMD connector / related 5.1k resistors & header for 4 pins to other boards like the CH340 programmer & V1.1 board V1 - ESP32 WROVER based board includes on board CH340 chip for programming , pins for connecting LED strips & badly aligned headers for other…

Main components on the Esp32-s3-dev

Esp32-s3-dev bill of materials (BOM)

48 components, 20 distinct parts.

QtyPartRefs
1
USBLC6-2SC6
U1
1
ESP32-S3-WROOM-1
U2
2
AMS1117-3.3
U3, U4
1
LIS3DH
U5
1
Conn_01x06_Pin
J1
6
Conn_01x04_Pin
J2, J7, J8, J9, J10, J11
1
Conn_01x08
J3
1
Conn_01x08
J4
1
Conn_01x04
J5
1
Conn_01x02
J6
1
SolderJumper_2_Open
JP1
1
SolderJumper_3_Open
JP2
2
SW_Push
SW1, SW2
9
WS2812B
D1, D2, D3, D4, D5, D6, D7, D8 +1
2
LED
D10, D11
4
10uF
C1, C2, C3, C4
5
10uF
C5, C6, C7, C8, C10
2
100nF
C9, C11
4
10k
R1, R2, R3, R4
2
330
R5, R6

Esp32-s3-dev design files

The KiCad project lives in the shades66/OddsAndEnds repository on GitHub; these links point at the commit this page was built from.

Esp32-s3-dev: common questions

What microcontroller does the Esp32-s3-dev use?

The Esp32-s3-dev is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the Esp32-s3-dev PCB?

The Esp32-s3-dev measures 46.6 × 32.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Esp32-s3-dev?

48 components, from 20 distinct parts. The full bill of materials is listed on this page.

Where can I download the Esp32-s3-dev design files?

From the shades66/OddsAndEnds repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Esp32-s3-dev design in my own project?

The repository has no license, so all rights stay with shades66. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Esp32-s3-dev without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in OddsAndEnds

Similar boards