Apex75
shahalthamas·Apex75·PCB/Apex75.kicad_pcb
About the Apex75 PCB
Apex75 is an open source Raspberry Pi PCB design by shahalthamas, published on GitHub under the MIT license. It is a 2-layer board measuring 349.1 × 130 mm, with 164 components from 11 distinct parts.
Its main chip is the RaspberryPi_Pico_W, from the Raspberry Pi family. By type, the board carries 81 switches, 81 diodes and 1 module.
It belongs with the keyboards designs in this gallery.
From the project
A from-scratch 75% mechanical keyboard design using a Raspberry Pi Pico 2 W and a rotary encoder.
A from-scratch 75% mechanical keyboard design using a Raspberry Pi Pico 2 W and a rotary encoder. The design combines an 81-key switch matrix, a two-layer PCB, and separate case, plate, and top-cover models. It is intended to be assembled as a compact daily-use keyboard; this repository currently documents the design and an untested starter firmware, not a completed physical build.

Main components on the Apex75
Apex75 bill of materials (BOM)
164 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RaspberryPi_Pico_W | RaspberryPi_Pico_Common_THT | A1 |
| 1 | DIODE | D_SOD-123 | RESWD1 |
| 71 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +63 |
| 2 | SW_Push | SW_Cherry_MX_2.00u_PCB | SW27, SW58 |
| 1 | SW_Push | SW_Cherry_MX_1.50u_PCB | SW29 |
| 1 | SW_Push | SW_Cherry_MX_ISOEnter_PCB | SW42 |
| 1 | SW_Push | SW_Cherry_MX_1.75u_PCB | SW44 |
| 1 | SW_Push | SW_Cherry_MX_2.25u_PCB | SW69 |
| 3 | SW_Push | SW_Cherry_MX_1.25u_PCB | SW72, SW73, SW74 |
| 1 | SW_Push | SW_Cherry_MX_6.25u_PCB | SW75 |
| 81 | DIODE | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +73 |
Apex75 design files
The KiCad project lives in the shahalthamas/Apex75 repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Apex75.kicad_pcb
- SchematicPCB/Apex75.kicad_sch
- BOMPCB/production/bom.csv
Apex75: common questions
What microcontroller does the Apex75 use?
The Apex75 is built around the RaspberryPi_Pico_W, from the Raspberry Pi family.
How big is the Apex75 PCB?
The Apex75 measures 349.1 × 130 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Apex75?
164 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Apex75 design files?
From the shahalthamas/Apex75 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Apex75 design in my own project?
Yes, under the terms of its MIT license, which shahalthamas chose for the repository.
Can I test firmware for the Apex75 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
Similar boards
Raspberry Pi
Open source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7kRaspberry Pi
Iot
dotnet
56 × 65 mm24 parts2LMIT2.4kRaspberry Pi
SPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3kRaspberry Pi
CM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0kRaspberry Pi
Haxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license673Raspberry Pi
Phased
Neumi
75 × 100 mm71 parts2LNo license507