Bonk Daddy
About the Bonk Daddy PCB
Bonk Daddy is an open source PCB design by shannon-greenlight, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 70.8 × 24 mm, with 23 components from 17 distinct parts.
Other key parts include the C132508. By type, the board carries 9 resistors, 5 diodes, 3 connectors, 2 transistors, 2 capacitors and 1 IC.
It belongs with the audio and displays & leds designs in this gallery.
From the project
Multifunction Eurorack Module
The Bonkulator is a Eurorack module that fits into a 3U x 14HP slot. It features 8 programmable outputs and 6 programmable inputs. The front-panel user controls consist of a 128×64 pixel 2-color OLED display, a rotary encoder for adjusting parameters and a button for each trigger and output.
These repos contain the materials needed to construct the Bonkulator main board and the front panel. The files are for KiCAD 6.0. Go to the Greenlight Kicad repo to get the needed libraries. The gerber files work with JLCPC and will most likely work with other board manufacturers.
Main components on the Bonk Daddy
Bonk Daddy bill of materials (BOM)
23 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C132508 74HC14 | DIP-14_W7.62mm_Socket | U1 |
| 1 | C232838 2N7000 | TO-92_Inline_Wide | Q3 |
| 1 | C9809 2N3906 | TO-92_Inline_Wide | Q4 |
| 1 | C225520 EXP | PinHeader_2x05_P2.54mm_Vertical | J1 |
| 1 | USB_B_Micro | USB_Micro-B_Wuerth_614105150721_Vertical | J2 |
| 1 | C386737 USB_A | USB_A_Amphenol_UE27AE54100_Vertical | J3 |
| 1 | Reset | SW_PUSH_6mm | SW1 |
| 1 | RED LED | LED_D3.0mm | D1 |
| 2 | GREEN LED | LED_D3.0mm | D2, D4 |
| 1 | YELLOW LED | LED_D3.0mm | D3 |
| 1 | BLUE LED | LED_D3.0mm | D5 |
| 2 | C94708 1uF | C_Rect_L7.0mm_W2.0mm_P5.00mm | C1, C3 |
| 4 | C120050 620 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R4, R5 |
| 1 | C120055 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R3 |
| 2 | C433778 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R9 |
| 1 | C176499 30K | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R7 |
| 1 | C176499 30K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
Bonk Daddy design files
The KiCad project lives in the shannon-greenlight/bonkulator repository on GitHub; these links point at the commit this page was built from.
Bonk Daddy: common questions
How big is the Bonk Daddy PCB?
The Bonk Daddy measures 70.8 × 24 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Bonk Daddy?
23 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Bonk Daddy design files?
From the shannon-greenlight/bonkulator repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Bonk Daddy design in my own project?
Yes, under the terms of its GPL-3.0 license, which shannon-greenlight chose for the repository.
More boards in bonkulator
AVR/ArduinoThe Bonkulator
70.8 × 110 mm255 parts4LGPL-3.011
Panel
70.8 × 128.4 mm55 parts2LGPL-3.011
BonkDaddy2HP
10 × 110 mm23 parts2LGPL-3.011
DuDad Panel
70.8 × 39.7 mm7 parts2LGPL-3.011
BonkDaddy2HP Panel
10 × 128.5 mm7 parts2LGPL-3.011
atopile
AxxAxx
Ottercast
eez-open