BonkDaddy2HP
About the BonkDaddy2HP PCB
BonkDaddy2HP is an open source PCB design by shannon-greenlight, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 10 × 110 mm, with 23 components from 16 distinct parts.
Other key parts include the C5605. By type, the board carries 9 resistors, 5 diodes, 3 connectors, 2 transistors, 2 capacitors and 1 IC.
It belongs with the audio and displays & leds designs in this gallery.
From the project
Multifunction Eurorack Module
The Bonkulator is a Eurorack module that fits into a 3U x 14HP slot. It features 8 programmable outputs and 6 programmable inputs. The front-panel user controls consist of a 128×64 pixel 2-color OLED display, a rotary encoder for adjusting parameters and a button for each trigger and output.
These repos contain the materials needed to construct the Bonkulator main board and the front panel. The files are for KiCAD 6.0. Go to the Greenlight Kicad repo to get the needed libraries. The gerber files work with JLCPC and will most likely work with other board manufacturers.
Main components on the BonkDaddy2HP
BonkDaddy2HP bill of materials (BOM)
23 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C5605 74AHC14 | SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | C8545 2N7002 | SOT-23 | Q3 |
| 1 | C266589 MMBT3906 | SOT-23 | Q4 |
| 1 | C124391 EXP | PinHeader_2x05_P2.54mm_Vertical_SMD | J1 |
| 1 | USB_B_Micro | USB_Micro-B_Wuerth_614105150721_Vertical | J2 |
| 1 | C386737 USB_A | USB_A_Amphenol_UE27AE54100_Vertical | J3 |
| 1 | Reset | SW_PUSH_6mm | SW1 |
| 1 | RED LED | LED_D3.0mm | D1 |
| 2 | GREEN LED | LED_D3.0mm | D2, D4 |
| 1 | YELLOW LED | LED_D3.0mm | D3 |
| 1 | BLUE LED | LED_D3.0mm | D5 |
| 2 | C28323 1uF | C_0805_2012Metric | C1, C3 |
| 4 | C17782 620 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R4, R5 |
| 1 | C17513 1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 2 | C17414 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R9 |
| 2 | C17621 30K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8 |
BonkDaddy2HP design files
The KiCad project lives in the shannon-greenlight/bonkulator repository on GitHub; these links point at the commit this page was built from.
BonkDaddy2HP: common questions
How big is the BonkDaddy2HP PCB?
The BonkDaddy2HP measures 10 × 110 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BonkDaddy2HP?
23 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BonkDaddy2HP design files?
From the shannon-greenlight/bonkulator repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the BonkDaddy2HP design in my own project?
Yes, under the terms of its GPL-3.0 license, which shannon-greenlight chose for the repository.
More boards in bonkulator
AVR/ArduinoThe Bonkulator
70.8 × 110 mm255 parts4LGPL-3.011
Panel
70.8 × 128.4 mm55 parts2LGPL-3.011
Bonk Daddy
70.8 × 24 mm23 parts2LGPL-3.011
DuDad Panel
70.8 × 39.7 mm7 parts2LGPL-3.011
BonkDaddy2HP Panel
10 × 128.5 mm7 parts2LGPL-3.011
atopile
AxxAxx
Ottercast
eez-open