PBJ EU
shannon-greenlight·PBJ_EU_3
About the PBJ EU PCB
PBJ EU is an open source PCB design by shannon-greenlight, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 111.4 × 128.5 mm, with 16 components from 4 distinct parts.
By type, the board carries 12 test points and 2 connectors.
It belongs with the audio designs in this gallery.
From the project
Eurorack development system
Features: - 800 point solderless proto board - 4 switched 3.5mm jacks. - Tip and Switch signals are routed from the jacks to the wiring connector. - +/- 12V and adjustable A and B power rails are routed to the wiring connector. - LED monitors for each jack. Red indicates positive voltage. Green indicates negative. - 2 Test points per jack gives convenient access for probing and injecting signals. - 2 Large Ground connection points are excellent for attaching alligator clips. - 3 MULT switches connect jack 1 to 2, jack 2 to 3 or jack 3 to 4. - Power is switched. - Power indicators show the…
PBJ EU bill of materials (BOM)
16 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_02x06_Odd_Even | PinSocket_2x06_P2.54mm_Vertical_SMD_no_holes | J1 |
| 1 | C492422 Conn_02x08_Odd_Even_Female | PinSocket_2x08_P2.54mm_Vertical | J6 |
| 2 | Breadboard_400 | Proto_400 | B1, B2 |
| 12 | TestPoint | TestPoint_Keystone_5005-5009_Compact | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 +4 |
PBJ EU design files
The KiCad project lives in the shannon-greenlight/PBJ_EU_3 repository on GitHub; these links point at the commit this page was built from.
- LayoutPBJ_EU.kicad_pcb
- SchematicPBJ_EU.kicad_sch
- BOMsub/bom/LCSC/sub_bom.csv
PBJ EU: common questions
How big is the PBJ EU PCB?
The PBJ EU measures 111.4 × 128.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PBJ EU?
16 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PBJ EU design files?
From the shannon-greenlight/PBJ_EU_3 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PBJ EU design in my own project?
Yes, under the terms of its GPL-3.0 license, which shannon-greenlight chose for the repository.
More boards in PBJ_EU_3
Similar boards
OtterCastAudioV2
Ottercast
50 × 49.3 mm216 parts4LMIT665FunBox
GuitarML
59.7 × 67.5 mm63 parts2LMIT278Eurorack pmod
apfaudio
35 × 110 mm116 parts4LCERN-OHL-S-2.0239XassetteAsterisk
SdtElectronics
56 × 56 mm137 parts2LCERN-OHL-W-2.0229AddOnC
freeDSP
380 × 45 mm97 parts2LCC-BY-SA-4.0222AddOnA
freeDSP
178 × 39 mm55 parts2LCC-BY-SA-4.0222