HardLabs

OpenDeck r3.1.2

shanteacontrols·OpenDeck·sch/opendeck/v3.1.x/OpenDeck-r3.1.2.kicad_pcb

OpenDeck r3.1.2 PCB layout, top view — open source RP2040/RP2350 board by shanteacontrols

About the OpenDeck r3.1.2 PCB

OpenDeck r3.1.2 is an open source RP2040/RP2350 PCB design by shanteacontrols, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 181 × 97 mm, with 258 components from 37 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the 74HC4067, 74HC165, 74HC138, MAX7219 and 74HCT125. By type, the board carries 133 diodes, 32 capacitors, 32 resistors, 17 ICs, 10 connectors and 1 crystal.

It belongs with the audio, displays & leds and sensors designs in this gallery, and the repository also holds 2 earlier revisions of it.

From the project

A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

OpenDeck is a platform for building interactive control and sensing devices using MIDI and OSC. From USB MIDI DJ controllers and DAW control surfaces to Ethernet-connected OSC nodes, sensor interfaces and media installations, OpenDeck supports a wide range of hardware projects.

Browser-based configuration No firmware development required Hardware-independent - supports multiple MCU families and development boards MIDI and OSC support * Extensible sensor support

OpenDeck r3.1.2, from the project README
From the project README

Main components on the OpenDeck r3.1.2

74HC406774HC16574HC138MAX721974HCT125TLP2362SPX3819M5W25Q128JVSRP20404051

OpenDeck r3.1.2 bill of materials (BOM)

258 components, 37 distinct parts — part numbers from the project's BOM.

QtyPartRefs
4
74HC4067
U1, U2, U3, U7
2
74HC165
U4, U8
1
74HC138
U5
1
MAX7219
U6
3
74HCT125
U9, U11, U12
1
TLP2362
U10
2
SPX3819M5
U14, U16
1
W25Q128JVS
U15
1
RP2040
U17
1
4051
U18
1
12MHZ
12MHz
Y1
2
DIN-5
J1, J2
4
CONN_01X04
Conn_01x04
J3, J6, J7, J8
2
CONN_01X02
Conn_01x02
J5, J11
1
TYPE-C-31-M-12
J9
1
CONN_01X03
Conn_01x03
J10
8
3X08
3x08
AH1, AH2, AH3, AH4, AH5, AH6, AH7, AH8
24
CONN_02X08_TOP_BOTTOM
Conn_02x08_Top_Bottom
IH1, IH2, IH3, IH4, IH5, IH6, IH7, IH8 +16
129
1N4148WT
D1, D2, D3, D4, D5, D6, D7, D8 +121
1
C84256
Red
D130
Show 17 more
QtyPartRefs
1
C142303
Green
D131
1
C84259
Blue
D132
1
PRTR5V0U2X
D133
1
C85840
FerriteBead
FB1
25
100N
100n
C1, C2, C3, C4, C5, C6, C7, C8 +17
4
1u
C14, C29, C30, C31
1
10U
10u
C15
2
16P
16p
C27, C28
17
4.7K
4.7k
R1, R2, R3, R4, R5, R6, R7, R8 +9
1
33
R17
1
10
R18
1
220
R19
4
1k
R23, R27, R28, R31
1
680
R25
3
10K
10k
R26, R34, R35
2
5.1K
5.1k
R29, R30
2
27
R32, R33

OpenDeck r3.1.2 design files

The KiCad project lives in the shanteacontrols/OpenDeck repository on GitHub; these links point at the commit this page was built from.

OpenDeck r3.1.2: common questions

What microcontroller does the OpenDeck r3.1.2 use?

The OpenDeck r3.1.2 is built around the RP2040, from the RP2040/RP2350 family.

How big is the OpenDeck r3.1.2 PCB?

The OpenDeck r3.1.2 measures 181 × 97 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the OpenDeck r3.1.2?

258 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the OpenDeck r3.1.2 design files?

From the shanteacontrols/OpenDeck repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the OpenDeck r3.1.2 design in my own project?

Yes, under the terms of its Apache-2.0 license, which shanteacontrols chose for the repository.

Can I test firmware for the OpenDeck r3.1.2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in OpenDeck

Earlier revisions in the repo: OpenDeck-r3.0.1, OpenDeck-r2.2.1

Similar boards