Keeb

sharonbasovich·keeb·pcb/keeb.kicad_pcb

Keeb PCB layout, top view — open source RP2040/RP2350 board by sharonbasovich

About the Keeb PCB

Keeb is an open source RP2040/RP2350 PCB design by sharonbasovich, published on GitHub. It is a 2-layer board measuring 309.1 × 121.7 mm, with 139 components from 4 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 70 switches, 68 diodes and 1 module.

It belongs with the keyboards designs in this gallery.

From the project

A custom 65% keyboard with two knobs and two function layers to maximize my productivity.

A custom 65% keyboard with two knobs and two function layers to maximize my productivity.

Apart from improving at CAD, KiCAD, programming, and soldering, my goal with this project was to make a keyboard that matched my preferences (such as two knobs) and could be made with readily available components. It uses standard switches, diodes, and encoders. Also, everything is THT which means I can use it to teach my friends soldering (like I did with my extra hackpad PCBs).

Keeb, from the project README
From the project README

Main components on the Keeb

Keeb bill of materials (BOM)

139 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RaspberryPi_Pico
A1
68
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +60
2
RotaryEncoder_Switch_MP
SW69, SW70
68
1N4148
D1, D2, D3, D4, D5, D6, D7, D8 +60

Keeb design files

The KiCad project lives in the sharonbasovich/keeb repository on GitHub; these links point at the commit this page was built from.

Keeb: common questions

What microcontroller does the Keeb use?

The Keeb is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Keeb PCB?

The Keeb measures 309.1 × 121.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Keeb?

139 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Keeb design files?

From the sharonbasovich/keeb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Keeb design in my own project?

The repository has no license, so all rights stay with sharonbasovich. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Keeb without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards