Keyboard

shivam-hegadi·keyboard·hardware/keyboard.kicad_pcb

Keyboard PCB layout, top view — open source RP2040/RP2350 board by shivam-hegadi

About the Keyboard PCB

Keyboard is an open source RP2040/RP2350 PCB design by shivam-hegadi, published on GitHub. It is a 2-layer board measuring 339.1 × 106.7 mm, with 134 components from 6 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 68 switches, 65 diodes and 1 module.

It belongs with the keyboards designs in this gallery.

From the project

keyboard for hackclub keeb program

This document outlines my process for designing and building my first custom mechanical keyboard from scratch, including PCB design, custom keycap design, and case engineering.

I began designing the schematic in KiCAD but encountered difficulties visualizing where the keys should be positioned and determining appropriate key sizes. I discovered keyboard-layout-editor.com, which allowed me to create an accurate layout template before proceeding with the actual PCB design. This tool significantly improved my understanding of the final layout.

Keyboard, from the project README
From the project README

Main components on the Keyboard

Keyboard bill of materials (BOM)

134 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RaspberryPi_Pico
A1
1
DDR5
S3
1
put me back!
SW1
64
SW_Push
SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 +56
2
RotaryEncoder
SW57, SW58
65
1N4148
D1, D2, D3, D4, D5, D6, D7, D8 +57

Keyboard design files

The KiCad project lives in the shivam-hegadi/keyboard repository on GitHub; these links point at the commit this page was built from.

Keyboard: common questions

What microcontroller does the Keyboard use?

The Keyboard is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Keyboard PCB?

The Keyboard measures 339.1 × 106.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Keyboard?

134 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Keyboard design files?

From the shivam-hegadi/keyboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Keyboard design in my own project?

The repository has no license, so all rights stay with shivam-hegadi. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Keyboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards