MicroPAD-PROPLUS
shreejita56·MicroPAD-PROPLUS·PCB/MicroPad ProPlus.kicad_pcb
About the MicroPAD-PROPLUS PCB
MicroPAD-PROPLUS is an open source RP2040/RP2350 PCB design by shreejita56, published on GitHub. It is a 2-layer board measuring 58 × 77 mm, with 27 components from 5 distinct parts.
Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 17 diodes, 9 switches and 1 IC.
It belongs with the keyboards designs in this gallery.
From the project
So I made a custom 3x3 Micropad based on Xiao RP2040 and it has a rotor encoder on top . We have used diodes to prevent ghosting , the Switches are hot-swappable and it has a compact design. The PCB Design was made on Kicad. Here I used the SMD Footprint for the Xiao Rp2040 and H
So I made a custom 3x3 Micropad based on Xiao RP2040 and it has a rotor encoder on top . We have used diodes to prevent ghosting , the Switches are hot-swappable and it has a compact design. The PCB Design was made on Kicad. Here I used the SMD Footprint for the Xiao Rp2040 and Hot-Swappable Footprint for the Switches . The rotor encoder at the top of the matrix also works as a switch . So In total We can use this MicroPad for 9 different Shortcuts and the rotor encoder can be used as a Volume Controller.Also It has per switch LEDS as well
Main components on the MicroPAD-PROPLUS
MicroPAD-PROPLUS bill of materials (BOM)
27 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-RP2040-DIP | XIAO-RP2040-DIP | U1 |
| 1 | RotaryEncoder_Switch_MP | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW0 |
| 8 | SW_Push | MX100H | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 9 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 +1 |
| 8 | SK6812-E | LED_SK6812-E | D10, D11, D12, D13, D14, D15, D16, D18 |
MicroPAD-PROPLUS design files
The KiCad project lives in the shreejita56/MicroPAD-PROPLUS repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/MicroPad ProPlus.kicad_pcb
- SchematicPCB/MicroPad ProPlus.kicad_sch
MicroPAD-PROPLUS: common questions
What microcontroller does the MicroPAD-PROPLUS use?
The MicroPAD-PROPLUS is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.
How big is the MicroPAD-PROPLUS PCB?
The MicroPAD-PROPLUS measures 58 × 77 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MicroPAD-PROPLUS?
27 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the MicroPAD-PROPLUS design files?
From the shreejita56/MicroPAD-PROPLUS repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MicroPAD-PROPLUS design in my own project?
The repository has no license, so all rights stay with shreejita56. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MicroPAD-PROPLUS without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k