MY-MICROPAD

shreejita56·MY-MICROPAD·PCB/MY-MicroPad.kicad_pcb

MY-MICROPAD PCB layout, top view — open source RP2040/RP2350 board by shreejita56

About the MY-MICROPAD PCB

MY-MICROPAD is an open source RP2040/RP2350 PCB design by shreejita56, published on GitHub. It is a 2-layer board measuring 79.8 × 60 mm, with 26 components from 5 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 16 diodes, 9 switches and 1 IC.

It belongs with the keyboards designs in this gallery.

From the project

So I made a custom 2x4 Micropad based on Xiao RP2040 and it has a rotor encoder on top . We have used diodes to prevent ghosting , the Switches are hot-swappable and it has a compact design.

So I made a custom 2x4 Micropad based on Xiao RP2040 and it has a rotor encoder on top . We have used diodes to prevent ghosting , the Switches are hot-swappable and it has a compact design.

We have also used a Diode with each Switch , So that we can prevent Ghosting. The PCB also have few connection holes which helps it to connect with the CASE Properly. I have tried to make the PCB design as compact as I could

MY-MICROPAD, from the project README
From the project README

Main components on the MY-MICROPAD

MY-MICROPAD bill of materials (BOM)

26 components, 5 distinct parts.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
1
RotaryEncoder_Switch_MP
SW0
8
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8
8
1N4148
D2, D3, D4, D5, D6, D7, D8, D9
8
SK6812-E
D10, D11, D12, D13, D14, D15, D16, D18

MY-MICROPAD design files

The KiCad project lives in the shreejita56/MY-MICROPAD repository on GitHub; these links point at the commit this page was built from.

MY-MICROPAD: common questions

What microcontroller does the MY-MICROPAD use?

The MY-MICROPAD is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the MY-MICROPAD PCB?

The MY-MICROPAD measures 79.8 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MY-MICROPAD?

26 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the MY-MICROPAD design files?

From the shreejita56/MY-MICROPAD repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the MY-MICROPAD design in my own project?

The repository has no license, so all rights stay with shreejita56. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MY-MICROPAD without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards