Linear Power Supply
shreyashswarnkar210205·Linear_Power_Supply·Linear_power_supply/Linear_Power_Supply/Linear_Power_Supply.kicad_sch
About the Linear Power Supply PCB
Linear Power Supply is an open source PCB design by shreyashswarnkar210205, published on GitHub. It is a board, with 16 components from 11 distinct parts.
Other key parts include the AMS1117-5.0 and AMS1117-3.3. By type, the board carries 6 capacitors, 3 connectors, 3 diodes, 2 ICs and 2 resistors.
It belongs with the power & battery designs in this gallery.
From the project
A compact and reliable linear power supply PCB designed to generate regulated +5V and +3.3V rails from a DC adapter input. This board is intended as a learning-focused yet industry-style design, emphasizing correct schematic design, component selection, and PCB layout practices.
A compact and reliable linear power supply PCB designed to generate regulated +5V and +3.3V rails from a DC adapter input. This board is intended as a learning-focused yet industry-style design, emphasizing correct schematic design, component selection, and PCB layout practices.
- DC barrel jack input (recommended 9V–12V) - Reverse polarity protection using Schottky diode - Regulated +5V output using AMS1117-5.0 - Regulated +3.3V output using AMS1117-3.3 - Proper input/output bulk and decoupling capacitors - Power indication LEDs for both rails - Ground plane–based PCB layout for low noise…
Main components on the Linear Power Supply
Linear Power Supply bill of materials (BOM)
16 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-5.0 | SOT-223-3_TabPin2 | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | Barrel_Jack | BarrelJack_CUI_PJ-063AH_Horizontal | J1 |
| 1 | 5V | TerminalBlock_bornier-2_P5.08mm | J2 |
| 1 | 3V3 | TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | 1N5819 | D_2512_6332Metric | D1 |
| 1 | GREEN | LED_1206_3216Metric | D2 |
| 1 | BLUE | LED_1206_3216Metric | D3 |
| 4 | 10u | CP_EIA-2012-12_Kemet-R_Pad1.30x1.05mm_HandSolder | C1, C3, C4, C6 |
| 2 | 0.1u | C_0805_2012Metric | C2, C5 |
| 2 | 1k | R_0805_2012Metric | R1, R2 |
Linear Power Supply design files
The KiCad project lives in the shreyashswarnkar210205/Linear_Power_Supply repository on GitHub; these links point at the commit this page was built from.
Linear Power Supply: common questions
How many components are on the Linear Power Supply?
16 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Linear Power Supply design files?
From the shreyashswarnkar210205/Linear_Power_Supply repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Linear Power Supply design in my own project?
The repository has no license, so all rights stay with shreyashswarnkar210205. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k