8-channel-CAN-module
About the 8-channel-CAN-module
8-channel-CAN-module is an open source PCB design by Shubham8-hub, published on GitHub. It is a 2-layer board measuring 143.7 × 76.6 mm, with 112 components from 24 distinct parts.
Other key parts include the MCP2515-xSO, MCP25612FD-E/SL and ATA6565-GCQW1. By type, the board carries 32 resistors, 24 diodes, 22 connectors, 20 capacitors, 8 ICs and 4 crystals.
It belongs with the rf & radio designs in this gallery.
Main components on the 8-channel-CAN-module
8-channel-CAN-module bill of materials (BOM)
112 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | MCP2515-xSO | MCP2515 | U101, U102, U103, U104 |
| 2 | MCP25612FD-E/SL | MCP25162FD | U105, U107 |
| 2 | ATA6565-GCQW1 | VDFN14_QBB_MCH-M | U106, U108 |
| 4 | Crystal | Crystal_HC49-4H_Vertical | Y101, Y102, Y103, Y104 |
| 1 | 5v_pin_terminal | PinHeader_1x02_P2.54mm_Vertical | J101 |
| 1 | 5V Inp | BarrelJack_Horizontal | J102 |
| 3 | SPI Remaining Pin | PinHeader_1x07_P2.54mm_Vertical | J103, J105, J109 |
| 1 | SPI 1 | PinHeader_1x06_P2.54mm_Vertical | J104 |
| 1 | SPI 3 | PinHeader_1x06_P2.54mm_Vertical | J106 |
| 1 | SPI 2 Remaining Pin | PinHeader_1x07_P2.54mm_Vertical | J107 |
| 1 | SPI 2 | PinHeader_1x06_P2.54mm_Vertical | J108 |
| 1 | SPI 4 | PinHeader_1x06_P2.54mm_Vertical | J110 |
| 1 | UART 1 | PinHeader_1x03_P2.54mm_Vertical | J111 |
| 1 | UART 2 | PinHeader_1x03_P2.54mm_Vertical | J112 |
| 1 | UART 3 | PinHeader_1x03_P2.54mm_Vertical | J113 |
| 1 | UART 4 | PinHeader_1x03_P2.54mm_Vertical | J114 |
| 8 | Screw_Terminal_01x02 | TerminalBlock_bornier-4_P5.08mm | J115, J116, J117, J118, J119, J120, J121, J122 |
| 2 | SW_DIP_x04 | SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mm | SW101, SW102 |
| 24 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D101, D102, D103, D104, D105, D106, D107, D108 +16 |
| 8 | 22pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C101, C102, C103, C104, C107, C108, C109, C110 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 12 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C105, C106, C111, C112, C113, C114, C115, C116 +4 |
| 8 | 330R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R101, R102, R103, R104, R121, R122, R123, R124 |
| 16 | 470R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R105, R106, R107, R108, R109, R110, R111, R112 +8 |
| 8 | 120R | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R125, R126, R127, R128, R129, R130, R131, R132 |
8-channel-CAN-module design files
The KiCad project lives in the Shubham8-hub/8-channel-CAN-module repository on GitHub; these links point at the commit this page was built from.
8-channel-CAN-module: common questions
How big is the 8-channel-CAN-module?
The 8-channel-CAN-module measures 143.7 × 76.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 8-channel-CAN-module?
112 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 8-channel-CAN-module design files?
From the Shubham8-hub/8-channel-CAN-module repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 8-channel-CAN-module design in my own project?
The repository has no license, so all rights stay with Shubham8-hub. Use it as a reference, and ask the author before reusing the design.
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hermes-Lite Small IO Expansion
softerhardware
18.4 × 12.5 mm6 parts2LNo license372
Hermes-Lite Jumper With IO
21.9 × 51.7 mm12 parts2LNo license372
Hermes-Lite PureSignal Feedback
17.1 × 15.4 mm6 parts2LNo license372