KEYBOARD

Shubhkr08·KEYBOARD·KEYBOARD/PCB/KeyBoard.kicad_pcb

KEYBOARD PCB layout, top view — open source RP2040/RP2350 board by Shubhkr08

About the KEYBOARD PCB

KEYBOARD is an open source RP2040/RP2350 PCB design by Shubhkr08, published on GitHub. It is a 2-layer board measuring 321 × 101 mm, with 130 components from 17 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 68 switches, 61 diodes and 1 module.

It belongs with the keyboards designs in this gallery.

From the project

- Base on Raspberry pico - Has 61 keys ( 60% Keyboard Matrix) - Has 2 Rotor Encoder ### Schematic ### PCB Design

- Base on Raspberry pico - Has 61 keys ( 60% Keyboard Matrix) - Has 2 Rotor Encoder ### Schematic ### PCB Design

Estimated Total Hardware Cost: USD 98.31

KEYBOARD, from the project README
From the project README

Main components on the KEYBOARD

KEYBOARD bill of materials (BOM)

130 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RaspberryPi_Pico
A1
1
MX_stab
S1
2
MX_stab
S2, S3
1
MX_stab
S4
1
MX_stab
S5
46
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +38
1
SW_Push
SW14
1
SW_Push
SW15
1
SW_Push
SW28
1
SW_Push
SW29
2
SW_Push
SW41, SW50
6
SW_Push
SW42, SW43, SW44, SW46, SW48, SW49
1
SW_Push
SW45
1
SW_Push
SW47
1
SW_Push
SW61
2
RotaryEncoder_Switch_MP
SW62, SW63
61
1N4148
D1, D2, D3, D4, D5, D6, D7, D8 +53

KEYBOARD design files

The KiCad project lives in the Shubhkr08/KEYBOARD repository on GitHub; these links point at the commit this page was built from.

KEYBOARD: common questions

What microcontroller does the KEYBOARD use?

The KEYBOARD is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the KEYBOARD PCB?

The KEYBOARD measures 321 × 101 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the KEYBOARD?

130 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the KEYBOARD design files?

From the Shubhkr08/KEYBOARD repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the KEYBOARD design in my own project?

The repository has no license, so all rights stay with Shubhkr08. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the KEYBOARD without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards