KICKPAD
Shubhkr08·KICKPAD·KICKPAD/PCB/KickPad.kicad_pcb
About the KICKPAD PCB
KICKPAD is an open source RP2040/RP2350 PCB design by Shubhkr08, published on GitHub. It is a 2-layer board measuring 58 × 77 mm, with 22 components from 5 distinct parts.
Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 10 switches, 10 diodes, 1 IC and 1 connector.
It belongs with the keyboards designs in this gallery.
From the project
This is a Xiao Rp2040 Based MicroPad , It has 9 Switches , a roter encode and a oled screen . We used matrix for switches so it uses less gpio pins and it has 4 layers the rotor key is used to change the layers which is displaced on the screen so in total we have keys output 9x4=
This is a Xiao Rp2040 Based MicroPad , It has 9 Switches , a roter encode and a oled screen . We used matrix for switches so it uses less gpio pins and it has 4 layers the rotor key is used to change the layers which is displaced on the screen so in total we have keys output 9x4=36 + 4 outputs from rotor = 40 Outputs. ## Features
- Based on Xiao Rp2040 - Has total 40 Outputs ## Firmware - Firmware is based on QMK.
Main components on the KICKPAD
KICKPAD bill of materials (BOM)
22 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-RP2040-DIP | XIAO-RP2040-DIP | U1 |
| 1 | Conn_01x04_Pin | OLED_128x32 | J2 |
| 1 | RotaryEncoder_Switch_MP | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW2 |
| 9 | SW_Push | MX100H | SW4, SW5, SW6, SW7, SW8, SW9, SW13, SW14 +1 |
| 10 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D4, D5, D6, D7, D8, D9, D10 +2 |
KICKPAD design files
The KiCad project lives in the Shubhkr08/KICKPAD repository on GitHub; these links point at the commit this page was built from.
- LayoutKICKPAD/PCB/KickPad.kicad_pcb
- SchematicKICKPAD/PCB/KickPad.kicad_sch
- BOMBOM.csv
KICKPAD: common questions
What microcontroller does the KICKPAD use?
The KICKPAD is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.
How big is the KICKPAD PCB?
The KICKPAD measures 58 × 77 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the KICKPAD?
22 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the KICKPAD design files?
From the Shubhkr08/KICKPAD repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the KICKPAD design in my own project?
The repository has no license, so all rights stay with Shubhkr08. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the KICKPAD without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k