ECE 319K Baseline Project
About the ECE 319K Baseline Project PCB
ECE 319K Baseline Project is an open source PCB design by Siddhant779, published on GitHub. It is a 2-layer board measuring 114.3 × 88.9 mm, with 40 components from 32 distinct parts.
Other key parts include the TLV5616CP, LP-MSPM0G3507, LM2937XMP and MCP34119P. By type, the board carries 17 resistors, 6 connectors, 4 ICs, 4 switches, 3 diodes and 3 capacitors.
From the project
tPod - digital music player; Part of the final lab for ECE445L class
The deliverables folder should contain documentation about your project as outlined in the lab documents.
The hw folder should contain your schematic and board files for your PCB or circuits. In labs 3-11, you will be creating schematics for your circuit in EAGLE. A setup tutorial can be found here.
The sw folder should contain your application firmware and software written for the lab. The sw/inc folder contains firmware drivers written for you by Professor Valvano. Feel free to write your own (in fact, in some labs, you may be required to write your own).
Main components on the ECE 319K Baseline Project
ECE 319K Baseline Project bill of materials (BOM)
40 components, 32 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLV5616CP Adafruit ST7735R Adafruit | adafruit_st7735r2 | U1 |
| 1 | LP-MSPM0G3507 Texas Instruments | ti_LP_MSPM0G3507 | U2 |
| 1 | LM2937XMP MCP34119P Motorola | DIP-8_W7.62mm_LongPads | U3 |
| 1 | MCP34119P HiLetGo_ST7735R HiLetGo | hiletgo_st7735r | U4 |
| 1 | AudioJack | Jack_3.5mm_CUI_SJ1-3523N_Horizontal | J1 |
| 1 | HEADER_4 Speaker | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | UART1 | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Pot | Testpoint_1x02_P2.54mm | J4 |
| 1 | GND | Testpoint_1x02_P2.54mm | J6 |
| 1 | DACOUT | Testpoint_1x02_P2.54mm | J7 |
| 1 | TExaS | PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | PTA2043 | PTA2043pot | RV1 |
| 1 | UP | SW_PUSH_6mm | SW1 |
| 1 | LEFT | SW_PUSH_6mm | SW2 |
| 1 | DOWN | SW_PUSH_6mm | SW3 |
| 1 | RGHT | SW_PUSH_6mm | SW4 |
| 1 | 3.3V | Testpoint_1x02_P2.54mm | TP1 |
| 3 | LED | LED_D5.0mm | D1, D2, D3 |
| 1 | 1UF 1uF | CP_Radial_Tantal200mil | C1 |
| 1 | 0.1UF 4.7uF | CP_Radial_Tantal200mil | C2 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4.7UF 0.1uF | C_Axial_200mil | C3 |
| 1 | 20K 470 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 10K 470 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | 470 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3 |
| 1 | 47K 1.5k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4 |
| 1 | 10K 1.5k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5 |
| 3 | 1.5k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R6, R7, R8 |
| 2 | 12k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R9, R10 |
| 1 | 10K 12k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R11 |
| 1 | 10K 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R12 |
| 4 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R13, R14, R15, R17 |
| 1 | 20k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R16 |
ECE 319K Baseline Project design files
The KiCad project lives in the Siddhant779/FinalLab445L repository on GitHub; these links point at the commit this page was built from.
ECE 319K Baseline Project: common questions
How big is the ECE 319K Baseline Project PCB?
The ECE 319K Baseline Project measures 114.3 × 88.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ECE 319K Baseline Project?
40 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ECE 319K Baseline Project design files?
From the Siddhant779/FinalLab445L repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ECE 319K Baseline Project design in my own project?
The repository has no license, so all rights stay with Siddhant779. Use it as a reference, and ask the author before reusing the design.
