ICE40UP-Development-Board
SimonBrenninger·ICE40UP-Development-Board·board/ICE40UP-Development-Board.kicad_pcb
About the ICE40UP-Development-Board
ICE40UP-Development-Board is an open source FPGA PCB design by SimonBrenninger, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 41.9 × 20.3 mm, with 60 components from 31 distinct parts.
Its main chip is the ICE40UP5K-SG48ITR, from the FPGA family. By type, the board carries 22 capacitors, 20 resistors, 5 crystals, 3 LEDs, 2 switches and 1 fuse.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
a small, entry-level FPGA Development Board
is a small formfactor, entry-level FPGA development board using a Lattice Semiconductor ultra low power chip.
ICE40UP-Development-Board bill of materials (BOM)
60 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USB4105-GF-A | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | X1 |
| 2 | Conn_01x16 | PinHeader_1x16_P2.54mm_Vertical | X2, X3 |
| 1 | Tag-Connect | Tag-Connect_TC2050-IDC-FP_2x05_P1.27mm_Vertical | X4 |
| 1 | 48MHz | Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | Y1 |
| 1 | 200mA | Fuse_0805_2012Metric | F1 |
| 1 | CONF | SW_SPST_EVQP2 | S1 |
| 1 | RST | SW_SPST_EVQP2 | S2 |
| 1 | W25Q128JVS | SOIC-8_5.23x5.23mm_P1.27mm | V1 |
| 1 | APS6404L | SON-8-1EP_3x2mm_P0.5mm_EP1.4x1.6mm | V2 |
| 1 | TLV7111233DSER | WSON-6_1.5x1.5mm_P0.5mm | V3 |
| 1 | USBLC6-2P6 | SOT-666 | V4 |
| 1 | ICE40UP5K-SG48ITR | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | V5 |
| 1 | LED_RGBA | CREE_UHD111A | V7 |
| 1 | PWR | LED_0603_1608Metric | V6 |
| 1 | CONF | LED_0603_1608Metric | V8 |
| 1 | CDONE | LED_0603_1608Metric | V9 |
| 1 | FerriteBead_Small | L_0603_1608Metric | FB1 |
| 8 | 100n | C_0402_1005Metric | C1, C7, C8, C14, C18, C19, C21, C22 |
| 3 | 10u | C_0402_1005Metric | C2, C3, C5 |
| 1 | 100u | C_0805_2012Metric | C4 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | 1u | C_0402_1005Metric | C6, C9, C10, C11, C12, C13, C17 |
| 3 | 10n | C_0402_1005Metric | C15, C16, C20 |
| 8 | 10k | R_0402_1005Metric | R1, R3, R4, R7, R8, R9, R13, R14 |
| 1 | 100R | R_0402_1005Metric | R2 |
| 2 | 5k11 | R_0402_1005Metric | R5, R6 |
| 1 | 1k5 | R_0402_1005Metric | R10 |
| 2 | 22R | R_0402_1005Metric | R11, R12 |
| 3 | 470R | R_0402_1005Metric | R15, R16, R17 |
| 1 | 1k | R_0402_1005Metric | R18 |
| 1 | 33k | R_0402_1005Metric | R19 |
| 1 | 2k2 | R_0402_1005Metric | R20 |
ICE40UP-Development-Board design files
The KiCad project lives in the SimonBrenninger/ICE40UP-Development-Board repository on GitHub; these links point at the commit this page was built from.
ICE40UP-Development-Board: common questions
What microcontroller does the ICE40UP-Development-Board use?
The ICE40UP-Development-Board is built around the ICE40UP5K-SG48ITR, from the FPGA family.
How big is the ICE40UP-Development-Board?
The ICE40UP-Development-Board measures 41.9 × 20.3 mm, has 4 copper layers and is 1.606 mm thick.
How many components are on the ICE40UP-Development-Board?
60 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the ICE40UP-Development-Board design files?
From the SimonBrenninger/ICE40UP-Development-Board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ICE40UP-Development-Board design in my own project?
Yes, under the terms of its GPL-3.0 license, which SimonBrenninger chose for the repository.
Can I test firmware for the ICE40UP-Development-Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.
Similar boards
FPGA
Base board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2kFPGA
Thunderscope Rev5.3
EEVengers
122.5 × 103.5 mm817 parts6LMIT1.3kFPGA
Usb sniffer
ataradov
58.2 × 38.1 mm86 parts2LBSD-3-Clause1.3kFPGA
Tomu, I'm
theacodes
13 × 9.4 mm40 parts4LMIT1.1kFPGA
Icepi zero
cheyao
65 × 30 mm143 parts4LSHL-2.1865FPGA
Gcvideo
ikorb
49 × 30 mm44 parts4LNo license765