Shorty
Simonhajd·Sticktility·pcb/shortypcb.kicad_pcb
About the Shorty PCB
Shorty is an open source PCB design by Simonhajd, published on GitHub. It is a 2-layer board measuring 93.2 × 24.4 mm, with 13 components from 9 distinct parts.
Other key parts include the ProMicro and 2465. By type, the board carries 4 capacitors, 2 ICs, 1 switch, 1 diode and 1 resistor.
It belongs with the sensors, displays & leds and power & battery designs in this gallery.
From the project
Stick-Tility is a handheld device that powers and reads data from snap-on sensor modules. Once a sensor is connected, it can record data at set time intervals and graph the data on its screen. It can charge via the USB-C on the side, and the KB2040 Microcontroller can be updated
Stick-Tility is a handheld device that powers and reads data from snap-on sensor modules. Once a sensor is connected, it can record data at set time intervals and graph the data on its screen. It can charge via the USB-C on the side, and the KB2040 Microcontroller can be updated or connected to a computer using the same USB-C port. This all fits in a durable case smaller than a TV remote.
Main components on the Shorty
Shorty bill of materials (BOM)
13 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ProMicro | kb2040 | U1 |
| 1 | 2465 | MODULE_2465 | U2 |
| 1 | 5.1Kohms | RC0603N_YAG | Resistor1 |
| 2 | 1mohm | RES_TLR_3AW1_2_4_KOA | Resistor2, Resistor3 |
| 1 | SW_SPST | onoffswitch | SW1 |
| 1 | UJ31-CH-G-SMT-TR-67 | CUI_UJ31-CH-G-SMT-TR-67 | USB-C1 |
| 1 | Nav Switch | Navigation_SMD_9.9x9.9mm | D-Pad1 |
| 4 | 0.1uF | CAPC1005X60 | C1, C2, C3, C4 |
| 1 | 5.1Kohms | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
Shorty design files
The KiCad project lives in the Simonhajd/Sticktility repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/shortypcb.kicad_pcb
- Schematicpcb/shortypcb.kicad_sch
- BOMBoM - Sheet1.csv
Shorty: common questions
How big is the Shorty PCB?
The Shorty measures 93.2 × 24.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Shorty?
13 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Shorty design files?
From the Simonhajd/Sticktility repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Shorty design in my own project?
The repository has no license, so all rights stay with Simonhajd. Use it as a reference, and ask the author before reusing the design.
More boards in Sticktility
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k