Nodes

Simonhajd·Sticktility·pcb/Nodes/Nodes.kicad_pcb

Nodes PCB layout, top view — open source RP2040/RP2350 board by Simonhajd

About the Nodes PCB

Nodes is an open source RP2040/RP2350 PCB design by Simonhajd, published on GitHub. It is a 2-layer board measuring 63.3 × 73 mm, with 7 components from 7 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. Other key parts include the RFM9X and TLV73333PDBVR. By type, the board carries 3 ICs, 2 connectors, 1 battery holder and 1 capacitor.

It belongs with the sensors, displays & leds and power & battery designs in this gallery.

From the project

Stick-Tility is a handheld device that powers and reads data from snap-on sensor modules. Once a sensor is connected, it can record data at set time intervals and graph the data on its screen. It can charge via the USB-C on the side, and the KB2040 Microcontroller can be updated

Stick-Tility is a handheld device that powers and reads data from snap-on sensor modules. Once a sensor is connected, it can record data at set time intervals and graph the data on its screen. It can charge via the USB-C on the side, and the KB2040 Microcontroller can be updated or connected to a computer using the same USB-C port. This all fits in a durable case smaller than a TV remote.

Nodes, from the project README
From the project README

Main components on the Nodes

Nodes bill of materials (BOM)

7 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
1
RFM9X
U2
1
TLV73333PDBVR
U3
1
Conn_Coaxial
J1
1
Conn_01x04_Pin
J2
1
Battery
BT1
1
1UF
C1

Nodes design files

The KiCad project lives in the Simonhajd/Sticktility repository on GitHub; these links point at the commit this page was built from.

Nodes: common questions

What microcontroller does the Nodes use?

The Nodes is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the Nodes PCB?

The Nodes measures 63.3 × 73 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Nodes?

7 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Nodes design files?

From the Simonhajd/Sticktility repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Nodes design in my own project?

The repository has no license, so all rights stay with Simonhajd. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Nodes without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in Sticktility

Similar boards