Hardware basic
simonyiszk·sem-tanfolyam-stc·stc_avr_isp/hardware_basic/hardware_basic.kicad_pcb
About the Hardware basic PCB
Hardware basic is an open source PCB design by simonyiszk, published on GitHub under the MIT license. It is a 2-layer board measuring 18 × 42.8 mm, with 16 components from 12 distinct parts.
By type, the board carries 9 resistors, 4 connectors and 3 diodes.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
STC8G1K08 mikrovezérlős fejlesztőpanel a 2023-as alapozó tanfolyamhoz.
STC8G1K08 mikrovezérlős fejlesztőpanel a Schönherz Elektronikai Műhely alapozó tanfolyamához (2023-tól). A projekt tartalmaz a devboardon kívül egy analóg hőmérővel, 7-szegmens kijelzőkkel, LED-ekkel, valamint gombokkal felszerelt alappanelt is, ezt tervezzük meg és készítjük el a tanfolyam során.
Hardware basic bill of materials (BOM)
16 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | CONN_01X09_MALE Conn_01x09_Socket | PinSocket_1x09_P2.54mm_Vertical | J1, J2 |
| 1 | USB_C_RECEPTACLE_USB2.0 ISP | PinSocket_2x03_P2.54mm_Horizontal | J3 |
| 1 | BAUD RATE | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | LL4148 LED_Filled | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | LL4148 PROG | LED_D3.0mm | D2 |
| 1 | ERROR | LED_D3.0mm | D3 |
| 1 | 220 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 3 | 10K 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4 |
| 1 | 10K 330 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 220 330 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 10K 0 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 2 | 5K1 330 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9 |
Hardware basic design files
The KiCad project lives in the simonyiszk/sem-tanfolyam-stc repository on GitHub; these links point at the commit this page was built from.
Hardware basic: common questions
How big is the Hardware basic PCB?
The Hardware basic measures 18 × 42.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hardware basic?
16 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hardware basic design files?
From the simonyiszk/sem-tanfolyam-stc repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Hardware basic design in my own project?
Yes, under the terms of its MIT license, which simonyiszk chose for the repository.
More boards in sem-tanfolyam-stc
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979