Hardware
simonyiszk·sem-tanfolyam-stc·stc_avr_isp/hardware/hardware.kicad_pcb
About the Hardware PCB
Hardware is an open source PCB design by simonyiszk, published on GitHub under the MIT license. It is a 2-layer board measuring 18 × 42.8 mm, with 22 components from 18 distinct parts.
Other key parts include the CH340E and STC8G1K08. By type, the board carries 9 resistors, 5 connectors, 3 diodes, 3 capacitors and 2 ICs.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
STC8G1K08 mikrovezérlős fejlesztőpanel a 2023-as alapozó tanfolyamhoz.
STC8G1K08 mikrovezérlős fejlesztőpanel a Schönherz Elektronikai Műhely alapozó tanfolyamához (2023-tól). A projekt tartalmaz a devboardon kívül egy analóg hőmérővel, 7-szegmens kijelzőkkel, LED-ekkel, valamint gombokkal felszerelt alappanelt is, ezt tervezzük meg és készítjük el a tanfolyam során.
Main components on the Hardware
Hardware bill of materials (BOM)
22 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH340E 74HC244 | TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | STC8G1K08 AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 2 | CONN_01X09_MALE Conn_01x09_Socket | PinSocket_1x09_P2.54mm_Vertical | J1, J2 |
| 1 | USB_C_RECEPTACLE_USB2.0 ISP | PinSocket_2x03_P2.54mm_Horizontal | J3 |
| 1 | TARGET VOLTAGE | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | BAUD RATE | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | LL4148 POWER | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | LL4148 PROG | LED_D3.0mm | D2 |
| 1 | ERROR | LED_D3.0mm | D3 |
| 1 | 100NF 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 1UF 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 100NF 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 220 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 3 | 10K 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4 |
| 2 | 10K 1k5 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R7 |
| 1 | 220 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 5K1 0 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 5K1 270 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
Hardware design files
The KiCad project lives in the simonyiszk/sem-tanfolyam-stc repository on GitHub; these links point at the commit this page was built from.
Hardware: common questions
How big is the Hardware PCB?
The Hardware measures 18 × 42.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hardware?
22 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hardware design files?
From the simonyiszk/sem-tanfolyam-stc repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Hardware design in my own project?
Yes, under the terms of its MIT license, which simonyiszk chose for the repository.
More boards in sem-tanfolyam-stc
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979