Tiny plant sensor
sini6a·tiny-plant-sensor
About the Tiny plant sensor PCB
Tiny plant sensor is an open source AVR/Arduino PCB design by sini6a, published on GitHub. It is a 2-layer board measuring 30.5 × 125 mm, with 6 components from 6 distinct parts.
Its main chip is the ATtiny85-20P, from the AVR/Arduino family. By type, the board carries 1 IC, 1 connector, 1 battery holder, 1 diode, 1 capacitor and 1 resistor.
It belongs with the power & battery and sensors designs in this gallery.
From the project
The Tiny Plant Sensor 🌱 is a low-power sensor designed around the Attiny85 microcontroller and powered by a CR2032 coin cell battery. It is designed to monitor the moisture level of a plant and provide a LED indication when watering is required.
The Tiny Plant Sensor 🌱 is a low-power sensor designed around the Attiny85 microcontroller and powered by a CR2032 coin cell battery. This sensor is designed to monitor the moisture level of a plant and provide a visual indication when watering is required.
- Utilizes Attiny85 microcontroller - Powered by CR2032 coin cell battery - Monitors plant moisture using capacitance level - Sleeps and wakes up every 6 seconds for power efficiency - Blinking LED indicates the need for watering

Main components on the Tiny plant sensor
Tiny plant sensor bill of materials (BOM)
6 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATtiny85-20P | DIP-8_W7.62mm_Socket | U101 |
| 1 | Conn_01x02_Socket | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Battery_Cell | BatteryHolder_Keystone_103_1x20mm | BT101 |
| 1 | RED_LED | LED_D3.0mm | D101 |
| 1 | DNP | C_0805_2012Metric | C101 |
| 1 | 1M | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R101 |
Tiny plant sensor design files
The KiCad project lives in the sini6a/tiny-plant-sensor repository on GitHub; these links point at the commit this page was built from.
- Layouttiny-plant-sensor.kicad_pcb
- Schematictiny-plant-sensor.kicad_sch
Tiny plant sensor: common questions
What microcontroller does the Tiny plant sensor use?
The Tiny plant sensor is built around the ATtiny85-20P, from the AVR/Arduino family.
How big is the Tiny plant sensor PCB?
The Tiny plant sensor measures 30.5 × 125 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Tiny plant sensor?
6 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Tiny plant sensor design files?
From the sini6a/tiny-plant-sensor repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Tiny plant sensor design in my own project?
The repository has no license, so all rights stay with sini6a. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Tiny plant sensor without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in tiny-plant-sensor
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k