Tiny plant sensor rounded

sini6a·tiny-plant-sensor

Tiny plant sensor rounded PCB layout, top view — open source AVR/Arduino board by sini6a

About the Tiny plant sensor rounded PCB

Tiny plant sensor rounded is an open source AVR/Arduino PCB design by sini6a, published on GitHub. It is a 2-layer board measuring 30.5 × 125 mm, with 6 components from 6 distinct parts.

Its main chip is the ATtiny85-20P, from the AVR/Arduino family. By type, the board carries 1 IC, 1 connector, 1 battery holder, 1 diode, 1 capacitor and 1 resistor.

It belongs with the power & battery and sensors designs in this gallery.

From the project

The Tiny Plant Sensor 🌱 is a low-power sensor designed around the Attiny85 microcontroller and powered by a CR2032 coin cell battery. It is designed to monitor the moisture level of a plant and provide a LED indication when watering is required.

The Tiny Plant Sensor 🌱 is a low-power sensor designed around the Attiny85 microcontroller and powered by a CR2032 coin cell battery. This sensor is designed to monitor the moisture level of a plant and provide a visual indication when watering is required.

- Utilizes Attiny85 microcontroller - Powered by CR2032 coin cell battery - Monitors plant moisture using capacitance level - Sleeps and wakes up every 6 seconds for power efficiency - Blinking LED indicates the need for watering

Tiny plant sensor rounded, from the project README
From the project README

Main components on the Tiny plant sensor rounded

Tiny plant sensor rounded bill of materials (BOM)

6 components, 6 distinct parts.

QtyPartRefs
1
ATtiny85-20P
U101
1
Conn_01x02_Socket
J1
1
Battery_Cell
BT101
1
RED_LED
D101
1
DNP
C101
1
1M
R101

Tiny plant sensor rounded design files

The KiCad project lives in the sini6a/tiny-plant-sensor repository on GitHub; these links point at the commit this page was built from.

Tiny plant sensor rounded: common questions

What microcontroller does the Tiny plant sensor rounded use?

The Tiny plant sensor rounded is built around the ATtiny85-20P, from the AVR/Arduino family.

How big is the Tiny plant sensor rounded PCB?

The Tiny plant sensor rounded measures 30.5 × 125 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Tiny plant sensor rounded?

6 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Tiny plant sensor rounded design files?

From the sini6a/tiny-plant-sensor repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Tiny plant sensor rounded design in my own project?

The repository has no license, so all rights stay with sini6a. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Tiny plant sensor rounded without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in tiny-plant-sensor

Similar boards