Tl59025-devboard
Sirawit7205·tl59025-devboard
About the Tl59025-devboard PCB
Tl59025-devboard is an open source AVR/Arduino PCB design by Sirawit7205, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 61 × 41 mm, with 65 components from 22 distinct parts.
Its main chip is the ATtiny414-SS, from the AVR/Arduino family. Other key parts include the AMS1117-3.3, CH340E and TL59025. By type, the board carries 35 diodes, 9 capacitors, 5 ICs, 5 resistors, 4 connectors and 4 jumpers.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Dev board for TLC59025 Constant Current Driver IC (and Chinese compatible ones)
This is an open-source KiCAD design files for a development for Texas Instruments TLC59025 16-Channel Constant Current LED Driver (and clones).
This devboard provides full flexibility for testing various configurations of the chip and surrounding circuits.
- Support original and clones in QSOP-24 package: - TI TLC59025IDBQR - Macroblock MBI5124GP - Shenzhen Sunmoon SM16206S - Shenzhen Sunmoon SM16306S - Shenzhen Titan TM5020A - Full control over the chip's functions: - Output LEDs on all output channels. - R-EXT trimpot on each chip for adjusting the sink current. - All control pins break…

Main components on the Tl59025-devboard
Tl59025-devboard bill of materials (BOM)
65 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | ATtiny414-SS | SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | CH340E | MSOP-10_3x3mm_P0.5mm | U3 |
| 2 | TL59025 | QSOP-24_3.9x8.7mm_P0.635mm | U4, U5 |
| 1 | UPDI | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12_NO_SBU_CircularHoles | J2 |
| 1 | Cascade In | PinHeader_1x08_P2.54mm_Vertical | J3 |
| 1 | Cascade Out | PinSocket_1x08_P2.54mm_Vertical | J4 |
| 2 | Jumper | SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2 |
| 1 | TX | PinHeader_1x02_P2.54mm_Vertical | JP3 |
| 1 | RX | PinHeader_1x02_P2.54mm_Vertical | JP4 |
| 2 | 10K | 3362P_1 | RV1, RV2 |
| 1 | SW_Push | TS-1101 | SW1 |
| 32 | LED | LED_0805_2012Metric | D1, D2, D3, D4, D5, D6, D7, D8 +24 |
| 2 | 0603ESDA-05N | D_0603_1608Metric | D33, D34 |
| 1 | LL4148 | D_MiniMELF | D35 |
| 5 | 100nF | C_0603_1608Metric | C1, C2, C3, C7, C9 |
| 2 | 10uF | CP_Radial_D5.0mm_P2.00mm | C4, C5 |
| 2 | 1uF | C_0603_1608Metric | C6, C8 |
| 2 | 5K1 | R_0603_1608Metric | R1, R2 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 510R | R_0603_1608Metric | R3, R4 |
| 1 | 470R | R_0603_1608Metric | R5 |
Tl59025-devboard design files
The KiCad project lives in the Sirawit7205/tl59025-devboard repository on GitHub; these links point at the commit this page was built from.
- LayoutTL59025_devboard.kicad_pcb
- SchematicTL59025_devboard.kicad_sch
Tl59025-devboard: common questions
What microcontroller does the Tl59025-devboard use?
The Tl59025-devboard is built around the ATtiny414-SS, from the AVR/Arduino family.
How big is the Tl59025-devboard PCB?
The Tl59025-devboard measures 61 × 41 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Tl59025-devboard?
65 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Tl59025-devboard design files?
From the Sirawit7205/tl59025-devboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Tl59025-devboard design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which Sirawit7205 chose for the repository.
Can I test firmware for the Tl59025-devboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k