Firefly
sjacksonhodum·firefly
About the Firefly PCB
Firefly is an open source RP2040/RP2350 PCB design by sjacksonhodum, published on GitHub. It is a 4-layer board measuring 17 × 22.1 mm, with 39 components from 26 distinct parts.
Its main chip is the ASTX-H11-25.000MHZ-T, from the RP2040/RP2350 family. Other key parts include the MAX-M10S, DMP2305U and ATmega328P-A. By type, the board carries 14 capacitors, 7 resistors, 6 connectors, 4 ICs, 3 inductors and 2 crystals.
From the project
pico balloon pcb
Main components on the Firefly
Firefly bill of materials (BOM)
39 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX-M10S | ublox_MAX | U3 |
| 2 | DMP2305U | SOT-23 | U4, U6 |
| 1 | ATmega328P-A | TQFP-32_7x7mm_P0.8mm | U5 |
| 1 | ASTX-H11-25.000MHZ-T | SMD3225 | Q1 |
| 1 | Si5351A-B-GT | MSOP-10_3x3mm_P0.5mm | Y1 |
| 1 | Resonator | OSC_CSTCE16M0V53-R0 | Y2 |
| 1 | Power | PinHeader_1x03_P1.27mm_Vertical | J1 |
| 1 | GPSANT | PinHeader_1x02_P1.27mm_Vertical | J2 |
| 1 | ICSP | PinHeader_1x06_P1.27mm_Vertical | J3 |
| 1 | SERIAL | PinHeader_1x03_P1.27mm_Vertical | J4 |
| 1 | I2C | PinHeader_1x02_P1.27mm_Vertical | J5 |
| 1 | HF ANT | PinHeader_1x02_P1.27mm_Vertical | J6 |
| 1 | MCP1754T-3302E/OT MCP1754T-3302E_OT | SOT95P270X145-5N | PS1 |
| 1 | BAT20JFILM | D_SOD-323 | D1 |
| 3 | 390nH | L_0402_1005Metric | L1, L4, L5 |
| 2 | 1.0uF | C_0402_1005Metric | C1, C2 |
| 2 | 0.47uF | C_0402_1005Metric | C3, C6 |
| 2 | 10nF | C_0402_1005Metric | C4, C15 |
| 1 | 100nF | C_0402_1005Metric | C5 |
| 1 | 0.1uF | C_0402_1005Metric | C8 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1uF | C_0402_1005Metric | C9 |
| 3 | 120pF | C_0402_1005Metric | C10, C12, C14 |
| 2 | 220pF | C_0402_1005Metric | C11, C13 |
| 3 | 1K | R_0402_1005Metric | R1, R3, R4 |
| 3 | 4.7K | R_0402_1005Metric | R2, R5, R6 |
| 1 | 10K | R_0402_1005Metric | R7 |
Firefly design files
The KiCad project lives in the sjacksonhodum/firefly repository on GitHub; these links point at the commit this page was built from.
- Layoutfirefly.kicad_pcb
- Schematicfirefly.kicad_sch
Firefly: common questions
What microcontroller does the Firefly use?
The Firefly is built around the ASTX-H11-25.000MHZ-T, from the RP2040/RP2350 family.
How big is the Firefly PCB?
The Firefly measures 17 × 22.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Firefly?
39 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the Firefly design files?
From the sjacksonhodum/firefly repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Firefly design in my own project?
The repository has no license, so all rights stay with sjacksonhodum. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Firefly without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k