Ultimate pi ivi hat
sjdean·ultimate-pi-ivi-hat·pcb/ultimate-hat-v0.2.kicad_sch
About the Ultimate pi ivi hat
Ultimate pi ivi hat is an open source Raspberry Pi PCB design by sjdean, published on GitHub. It is a board, with 8 components from 5 distinct parts.
Its main chip is the Raspberry_Pi_GPIO, from the Raspberry Pi family. Other key parts include the MP9943 and TPA3255. By type, the board carries 4 relays, 2 ICs and 2 connectors.
It belongs with the rf & radio and dev boards & breakouts designs in this gallery.
From the project
Ultimate in car pi hat
BOM: ~$160 (100 pcs) | Size: 85×56 mm (Pi HAT standard) | 4-layer PCB
Built with ❤️ by @sjdean + Grok (xAI). Questions? Open an issue.
Main components on the Ultimate pi ivi hat
Ultimate pi ivi hat bill of materials (BOM)
8 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MP9943 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | TPA3255 | TQFP-56_10x10mm_P0.5mm | U3 |
| 1 | Raspberry_Pi_GPIO | J1 | |
| 1 | Front_L+,L-,R+,R- | J10 | |
| 4 | — | K1, K2, K3, K4 |
Ultimate pi ivi hat design files
The KiCad project lives in the sjdean/ultimate-pi-ivi-hat repository on GitHub; these links point at the commit this page was built from.
- Schematicpcb/ultimate-hat-v0.2.kicad_sch
Ultimate pi ivi hat: common questions
What microcontroller does the Ultimate pi ivi hat use?
The Ultimate pi ivi hat is built around the Raspberry_Pi_GPIO, from the Raspberry Pi family.
How many components are on the Ultimate pi ivi hat?
8 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ultimate pi ivi hat design files?
From the sjdean/ultimate-pi-ivi-hat repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Ultimate pi ivi hat design in my own project?
The repository has no license, so all rights stay with sjdean. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Ultimate pi ivi hat without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
Similar boards
Raspberry Pi
Open source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7kRaspberry Pi
Iot
dotnet
56 × 65 mm24 parts2LMIT2.4kRaspberry Pi
SPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3kRaspberry Pi
CM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0kRaspberry Pi
Haxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license673Raspberry Pi
Phased
Neumi
75 × 100 mm71 parts2LNo license507