HackPad

skully-cloud·HackPad·Hack Club Blueprint/PCB/Blueprint_kicad_pcb.kicad_pcb

HackPad PCB layout, top view — open source RP2040/RP2350 board by skully-cloud

About the HackPad PCB

HackPad is an open source RP2040/RP2350 PCB design by skully-cloud, published on GitHub. It is a 2-layer board measuring 42.9 × 63.5 mm, with 7 components from 3 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 4 switches, 2 diodes and 1 IC.

It belongs with the keyboards designs in this gallery.

From the project

A custom 4-key macropad with dual encoders using XIAO RP2040.

HackPad, from the project README
From the project README

Main components on the HackPad

HackPad bill of materials (BOM)

7 components, 3 distinct parts.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
4
SW_Push
SW1, SW2, SW3, SW4
2
SK6812
D1, D2

HackPad design files

The KiCad project lives in the skully-cloud/HackPad repository on GitHub; these links point at the commit this page was built from.

HackPad: common questions

What microcontroller does the HackPad use?

The HackPad is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the HackPad PCB?

The HackPad measures 42.9 × 63.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the HackPad?

7 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the HackPad design files?

From the skully-cloud/HackPad repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the HackPad design in my own project?

The repository has no license, so all rights stay with skully-cloud. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the HackPad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards