CDHS
skycan·hardware·cdhs/skycan-cdhs.kicad_pcb
About the CDHS PCB
CDHS is an open source TI MSP430/CC PCB design by skycan, published on GitHub under the Custom license license. It is a 2-layer board measuring 50 × 50 mm, with 44 components from 27 distinct parts.
Its main chip is the MSP430F5528IRGCT, from the TI MSP430/CC family. Other key parts include the MICRO-B_USB, FM24CL04B and SST25VF080B. By type, the board carries 17 capacitors, 11 resistors, 5 connectors, 4 ICs, 4 diodes and 2 crystals.
From the project
Skycan hardware files
Main components on the CDHS
CDHS bill of materials (BOM)
44 components, 27 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MSP430F5528IRGCT | S-PVQFN-N64 | U1 |
| 1 | MICRO-B_USB | MICRO-B_USB | U2 |
| 1 | FM24CL04B | SO8E | U3 |
| 1 | SST25VF080B | SO8E | U4 |
| 1 | 32.768KHZ 32.768kHz | ABS10 | X1 |
| 1 | 4MHZ 4MHz | HC49 | X2 |
| 2 | DF9_25P_1V_PLUG | DF9-25P-1V-plug | J1, J3 |
| 2 | DF9_25P_1V_SOCKET | DF9-25P-1V-socket | J2, J4 |
| 1 | CONN_3X2 | PINHEAD-2x6_SMD | P1 |
| 1 | SWITCH_4PIN | ALPS_BUTTON | SW1 |
| 1 | DIODESCH3PIN | SOT23 | D1 |
| 3 | LED | LED-0603 | D2, D3, D4 |
| 1 | 2.2NF 2.2nF | SM0402_c | C1 |
| 3 | 10UF 10uF | SM0603_Capa | C4, C6, C10 |
| 4 | 100NF 100nF | SM0402_c | C5, C7, C11, C19 |
| 1 | 470NF 470nF | SM0603_Capa | C8 |
| 2 | 220NF 220nF | SM0402_c | C9, C12 |
| 2 | 12.5PF 12.5pF | SM0402_c | C13, C14 |
| 2 | 10PF 10pF | SM0402_c | C15, C16 |
| 2 | 18PF 18pF | SM0402_c | C17, C18 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 47K | SM0402_r | R1 |
| 2 | 27R | SM0402_r | R2, R3 |
| 1 | 100R | SM0402_r | R4 |
| 1 | 1M | SM0402_r | R5 |
| 1 | 1K5 1k5 | SM0402_r | R6 |
| 3 | 1k | SM0402_r | R7, R8, R9 |
| 2 | 10K 10k | SM0402_r | R10, R11 |
CDHS design files
The KiCad project lives in the skycan/hardware repository on GitHub; these links point at the commit this page was built from.
CDHS: common questions
What microcontroller does the CDHS use?
The CDHS is built around the MSP430F5528IRGCT, from the TI MSP430/CC family.
How big is the CDHS PCB?
The CDHS measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CDHS?
44 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the CDHS design files?
From the skycan/hardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the CDHS design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Can I test firmware for the CDHS without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug TI MSP430/CC firmware against it before you order a PCB.
More boards in hardware
Similar boards
TI MSP430/CC
Pluto
carrotIndustries
24.4 × 24.4 mm36 parts2LGPL-3.0536TI MSP430/CC
Apimote
riverloopsec
83.3 × 33.4 mm80 parts4LTAPR-OHL-1.089TI MSP430/CC
Toniebox
toniebox-reverse-engineering
88 × 102 mm11 parts2LNo license36TI MSP430/CC
Nsumo hardware
artfulbytes
50 × 65 mm73 parts2LMIT33TI MSP430/CC
Elektronika-1
BenjaminSoelberg
29.5 × 29.5 mm14 parts4LGPL-3.029TI MSP430/CC
MSP430 Breadstick - Apple Sauce
upsidedownlabs
18.5 × 65.8 mm31 parts2LCERN-OHL-S-2.021