Dvh
About the Dvh PCB
Dvh is an open source STM32 PCB design by Sleeeee, published on GitHub under the MIT license. It is a 2-layer board measuring 49 × 37 mm, with 36 components from 20 distinct parts.
Its main chip is the STM32F103C8Tx, from the STM32 family. Other key parts include the AMS1117-3.3 and M24C02-WMN. By type, the board carries 13 capacitors, 8 resistors, 5 connectors, 3 ICs, 2 test points and 2 diodes.
From the project
Damn Vulnerable Hardware (DVH)
Main components on the Dvh
Dvh bill of materials (BOM)
36 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103C8Tx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | M24C02-WMN | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | 2N7002 | SOT-23 | Q1 |
| 1 | 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_B_Micro | USB_Micro-B_Amphenol_10118194-0001LF_Horizontal | J1 |
| 3 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J2, J3, J4 |
| 1 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J5 |
| 2 | TestPoint | PinSocket_1x01_P2.54mm_Vertical | TP1, TP2 |
| 1 | RED | LED_0603_1608Metric | D1 |
| 1 | GREEN | LED_0603_1608Metric | D2 |
| 1 | 120R | L_0603_1608Metric | FB1 |
| 5 | 100n | C_0402_1005Metric | C1, C2, C3, C4, C9 |
| 1 | 10u | C_0603_1608Metric | C5 |
| 1 | 10n | C_0402_1005Metric | C6 |
| 2 | 1u | C_0402_1005Metric | C7, C8 |
| 2 | 10p | C_0402_1005Metric | C10, C11 |
| 2 | 22u | C_0805_2012Metric | C12, C13 |
| 2 | 10k | R_0402_1005Metric | R1, R8 |
| 6 | 1k5 | R_0402_1005Metric | R2, R3, R4, R5, R6, R7 |
Dvh design files
The KiCad project lives in the Sleeeee/dvh repository on GitHub; these links point at the commit this page was built from.
Dvh: common questions
What microcontroller does the Dvh use?
The Dvh is built around the STM32F103C8Tx, from the STM32 family.
How big is the Dvh PCB?
The Dvh measures 49 × 37 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Dvh?
36 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Dvh design files?
From the Sleeeee/dvh repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Dvh design in my own project?
Yes, under the terms of its MIT license, which Sleeeee chose for the repository.
Can I test firmware for the Dvh without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in dvh
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32Type c
google
188 × 30 mm17 parts2LApache-2.02.9k
STM32Main panel
234 × 84 mm26 parts4LApache-2.02.9k
STM32Base
52.3 × 52.3 mm36 parts2LApache-2.02.9k
STM32Type a
150 × 30 mm14 parts2LApache-2.02.9k
STM32Type e
140.5 × 30 mm13 parts2LApache-2.02.9k