Slimenrfdock
About the Slimenrfdock PCB
Slimenrfdock is an open source PCB design by SlimeVR, published on GitHub. It is a 2-layer board measuring 16.8 × 29 mm, with 12 components from 8 distinct parts.
Other key parts include the BQ25170JDSGR. By type, the board carries 5 resistors, 2 connectors, 2 diodes, 2 capacitors and 1 IC.
It belongs with the power & battery designs in this gallery.
From the project
SlimeNRF PCBs and 3D model files for cases and dock
You need a segger jlink programmer to use this, USB dfu does not come with the initial bootloader of isp, and nrf52832 has no USB connectivity. nRF52840-dk development kit can be used, and also can double as a dongle for the trackers.
E73-2G4M08S1C (nrf52840), icm42688 or compatible, mmc5983ma
isp1507-ax (nrf52832), icm42688 or compatible, mmc5983ma
Uses nrf52832, no USB, SWD pins on dock connector instead No 0201 parts Removed onboard charger LED is brighter (sink instead of source) * IMU is incorrectly wired
Main components on the Slimenrfdock
Slimenrfdock bill of materials (BOM)
12 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BQ25170JDSGR | SON50P200X200X80-9N | IC1 |
| 1 | Conn_01x09_Pin | PinHeader_1x09_P2.54mm_Vertical | J1 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 2 | D | D_0603_1608Metric | D1, D2 |
| 2 | 1uF | C_0402_1005Metric | C1, C2 |
| 1 | 27K | R_0402_1005Metric | R1 |
| 3 | 1K | R_0402_1005Metric | R2, R4, R5 |
| 1 | 10K | R_0402_1005Metric | R3 |
Slimenrfdock design files
The KiCad project lives in the SlimeVR/SlimeVR-Tracker-nRF-PCB repository on GitHub; these links point at the commit this page was built from.
Slimenrfdock: common questions
How big is the Slimenrfdock PCB?
The Slimenrfdock measures 16.8 × 29 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Slimenrfdock?
12 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Slimenrfdock design files?
From the SlimeVR/SlimeVR-Tracker-nRF-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Slimenrfdock design in my own project?
The repository has no license, so all rights stay with SlimeVR. Use it as a reference, and ask the author before reusing the design.
More boards in SlimeVR-Tracker-nRF-PCB
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k