Heart

slogic3d-cloud·heart·hardware/heart.kicad_pcb

Heart PCB layout, top view — open source board by slogic3d-cloud

About the Heart PCB

Heart is an open source PCB design by slogic3d-cloud, published on GitHub under the MIT license. It is a 2-layer board measuring 161.8 × 152.9 mm, with 103 components from 11 distinct parts.

Other key parts include the SN74AHCT1G125DBVR and XIAO_ESP32C3. By type, the board carries 49 capacitors, 47 diodes, 3 resistors, 2 ICs, 1 connector and 1 switch.

It belongs with the displays & leds designs in this gallery.

From the project

A heart with a matrix led in heart form.

A heart with a matrix led in heart form.

Ein herzförmiges PCB mit 46 RGB-LEDs (WS2812B), das eine Lichtshow abspielt. Ein Taster auf der Rückseite schaltet zwischen den Effekten um, Strom kommt per USB-C. Gesteuert wird alles von einem Seeed XIAO ESP32-C3, der hinten aufgesteckt ist.

Das ist die vereinfachte Übersicht. Der echte KiCad-Schaltplan ist hardware/heart.kicadsch` (als PDF: docs/schematic.pdf), siehe Schaltplan in KiCad.

Heart, from the project README
From the project README

Main components on the Heart

Heart bill of materials (BOM)

103 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SN74AHCT1G125DBVR
74AHCT1G125
U1
1
XIAO_ESP32C3
U2
1
C165948
USB-C Power
J1
1
Effekt
SW1
46
C114586
WS2812B
D1, D2, D3, D4, D5, D6, D7, D8 +38
1
C408258
SS34
D47
47
C14663
100nF
C1, C2, C3, C4, C5, C6, C7, C8 +39
1
C15850
10uF
C49
1
1000uF 10V
C50
1
C23138
330R
R1
2
C23186
5k1
R2, R3

Heart design files

The KiCad project lives in the slogic3d-cloud/heart repository on GitHub; these links point at the commit this page was built from.

Heart: common questions

How big is the Heart PCB?

The Heart measures 161.8 × 152.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Heart?

103 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Heart design files?

From the slogic3d-cloud/heart repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Heart design in my own project?

Yes, under the terms of its MIT license, which slogic3d-cloud chose for the repository.

Similar boards