CC1101 Module

sneakylizard123-4·CC1101_Module·kicad/CC1101.kicad_pcb

CC1101 Module layout, top view — open source board by sneakylizard123-4

About the CC1101 Module

CC1101 Module is an open source PCB design by sneakylizard123-4, published on GitHub under the CERN-OHL-P-2.0 license. It is a 4-layer board measuring 50 × 30 mm, with 45 components from 24 distinct parts.

Other key parts include the CC1101 and CC1190. By type, the board carries 27 capacitors, 11 inductors, 2 ICs, 2 connectors, 2 resistors and 1 crystal.

It belongs with the rf & radio and dev boards & breakouts designs in this gallery.

From the project

A simple breakout-style radio module for long-range sub-GHz link without designing an RF front end from scratch. An SPI header brings the CC1101 onto any microcontroller bus, and the CC1190 adds a power amplifier and low-noise amplifier between the transceiver and an edge-mount S

A simple breakout-style radio module for long-range sub-GHz link without designing an RF front end from scratch. An SPI header brings the CC1101 onto any microcontroller bus, and the CC1190 adds a power amplifier and low-noise amplifier between the transceiver and an edge-mount SMA.

- CC1101 + CC1190 combo - the CC1190 front end adds up to +20 dBm TX power and a low-noise receive path, which is a meaningful power and range increase over a bare CC1101 module. - Hardware TX/RX switching - the CC1101 GDO0 and GDO2 pins drive CC1190 PAEN and LNAEN directly, so the front end follows the radio…

CC1101 Module, from the project README
From the project README

Main components on the CC1101 Module

CC1101 Module bill of materials (BOM)

45 components, 24 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CC1101
U1
1
CC1190
U2
1
26MHZ
26MHz
X1
1
Conn_Coaxial
J1
1
CONN_01X08
Conn_01x08
J2
4
12NH
12nH
L1, L2, L5, L6
2
18NH
18nH
L3, L4
1
3.3NH
3.3nH
L7
1
3.9NH
3.9nH
L8
1
2.2NH
2.2nH
L9
1
7.5NH
7.5nH
L10
1
10NH
10nH
L11
10
100NF
100nF
C1, C19, C20, C21, C22, C23, C24, C25 +2
1
1PF
1pF
C2
2
1.5PF
1.5pF
C3, C5
1
100PF
100pF
C4
2
3.3PF
3.3pF
C6, C13
2
27PF
27pF
C7, C8
4
47PF
47pF
C9, C15, C17, C18
3
12PF
12pF
C10, C14, C16
Show 4 more
QtyPartRefs
1
0.5PF
0.5pF
C11
1
8.2PF
8.2pF
C12
1
56K
56k
R1
1
3.3K
3.3k
R2

CC1101 Module design files

The KiCad project lives in the sneakylizard123-4/CC1101_Module repository on GitHub; these links point at the commit this page was built from.

CC1101 Module: common questions

How big is the CC1101 Module?

The CC1101 Module measures 50 × 30 mm, has 4 copper layers and is 1.6062 mm thick.

How many components are on the CC1101 Module?

45 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the CC1101 Module design files?

From the sneakylizard123-4/CC1101_Module repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the CC1101 Module design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which sneakylizard123-4 chose for the repository.

Similar boards