Window to Another World
SoberingRealityCheck·EDES301·project_02/hardware/window/window.kicad_pcb
About the Window to Another World PCB
Window to Another World is an open source PCB design by SoberingRealityCheck, published on GitHub under the MIT license. It is a 4-layer board measuring 256 × 46 mm, with 22 components from 10 distinct parts.
By type, the board carries 6 ICs, 5 resistors, 4 modules, 4 switches, 2 connectors and 1 crystal.
It belongs with the displays & leds designs in this gallery.
From the project
Repository for my Spring 2026 'EDES 301 - Introduction to Practical Electrical Engineering' classwork.
This repo contains the KiCAD Project files for my 'Window to Another World' EDES 310 PCB project.
The Window is a device intended for art programs / simple games - it runs a linux system with a custom LED matrix display and connections to an IMU, a buzzer, and four buttons.
This repo contains the KiCAD project files for the full system on one chip.
The board is a four-layer PCB with a custom design intended to be mounted directly below the LED Matrix and span the full width of the device.

Window to Another World bill of materials (BOM)
22 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ BeagleBoard.org | POCKETBEAGLE | U1 |
| 2 | ~ EPLZON | EP-TXS0-108E | U2, U3 |
| 1 | ~ YUEXIN | BUZZER_6.5MM | U4 |
| 1 | ~ AITRIP | MPU6050 Breakout Board | U5 |
| 1 | ~ Adafruit | DCJACK_2MM_PTH | U6 |
| 4 | ~ - | MOUNTING_HOLE | M1, M2, M3, M4 |
| 1 | ~ Adafruit | 2X08_SHROUDED | X1 |
| 2 | 7696 Keystone Electronics | KEYSTONE_7696 | J1, J2 |
| 4 | ~ - | BUTTON_12.5MM | SW1, SW2, SW3, SW4 |
| 5 | ~ - | R0805 | R2, R3, R4, R5, R6 |
Window to Another World design files
The KiCad project lives in the SoberingRealityCheck/EDES301 repository on GitHub; these links point at the commit this page was built from.
Window to Another World: common questions
How big is the Window to Another World PCB?
The Window to Another World measures 256 × 46 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Window to Another World?
22 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Window to Another World design files?
From the SoberingRealityCheck/EDES301 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Window to Another World design in my own project?
Yes, under the terms of its MIT license, which SoberingRealityCheck chose for the repository.
More boards in EDES301
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k