Triple Axis Accelerometer - Gyro Breakout - MPU-6050 v12
SoberingRealityCheck·EDES301·project_02/hardware/window/Triple_Axis_Accelerometer-Gyro_Breakout_-_MPU-6050_v12/kicad ver/Triple_Axis_Accelerometer_-_Gyro_Breakout_-_MPU-6050_v12.kicad_pcb
About the Triple Axis Accelerometer - Gyro Breakout - MPU-6050 v12
Triple Axis Accelerometer - Gyro Breakout - MPU-6050 v12 is an open source PCB design by SoberingRealityCheck, published on GitHub under the MIT license. It is a 2-layer board measuring 25.4 × 15.2 mm, with 16 components from 12 distinct parts.
Other key parts include the MPU-6050-1 and REVISION. By type, the board carries 4 capacitors, 3 ICs, 3 jumpers and 2 resistors.
It belongs with the sensors, displays & leds and dev boards & breakouts designs in this gallery.
From the project
Repository for my Spring 2026 'EDES 301 - Introduction to Practical Electrical Engineering' classwork.
This repo contains the KiCAD Project files for my 'Window to Another World' EDES 310 PCB project.
The Window is a device intended for art programs / simple games - it runs a linux system with a custom LED matrix display and connections to an IMU, a buzzer, and four buttons.
This repo contains the KiCAD project files for the full system on one chip.
The board is a four-layer PCB with a custom design intended to be mounted directly below the LED Matrix and span the full width of the device.

Main components on the Triple Axis Accelerometer - Gyro Breakout - MPU-6050 v12
Triple Axis Accelerometer - Gyro Breakout - MPU-6050 v12 bill of materials (BOM)
16 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MPU-6050-1 BeagleBoard.org | QFN-24-4MM2 | U1 |
| 1 | — | SFE-NEW-WEB | U$4 |
| 1 | REVISION | REVISION | U$5 |
| 1 | FRAME-LETTER | CREATIVE_COMMONS | FRAME1 |
| 2 | STAND-OFFTIGHT | STAND-OFF-TIGHT | JP3, JP4 |
| 1 | M10" | 1X10 | JP6 |
| 1 | — | SJ_3_PASTE2&3 | SJ1 |
| 2 | — | SJ_2S-TRACE | SJ2, SJ3 |
| 2 | 0.1uF | 0603-CAP | C1, C3 |
| 1 | 2.2nF | 0603-CAP | C2 |
| 1 | 10nF | 0603-CAP | C4 |
| 2 | 10k | 0603-RES | R1, R2 |
Triple Axis Accelerometer - Gyro Breakout - MPU-6050 v12 design files
The KiCad project lives in the SoberingRealityCheck/EDES301 repository on GitHub; these links point at the commit this page was built from.
Triple Axis Accelerometer - Gyro Breakout - MPU-6050 v12: common questions
How big is the Triple Axis Accelerometer - Gyro Breakout - MPU-6050 v12?
The Triple Axis Accelerometer - Gyro Breakout - MPU-6050 v12 measures 25.4 × 15.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Triple Axis Accelerometer - Gyro Breakout - MPU-6050 v12?
16 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Triple Axis Accelerometer - Gyro Breakout - MPU-6050 v12 design files?
From the SoberingRealityCheck/EDES301 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Triple Axis Accelerometer - Gyro Breakout - MPU-6050 v12 design in my own project?
Yes, under the terms of its MIT license, which SoberingRealityCheck chose for the repository.
More boards in EDES301
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k